The UWT 6008 Canopen weight transmitter results from the experience of Pavone Systems. It is a unique product in the weight transmitter family and is ideal for all industrial applications where it is necessary to know the load distribution on the different cells. The UWT 6008 Canopen weight transmitter is able to monitor all load cells and generate alarms due to excessive cell signal drift, missing connections, failure of one of the cells and unbalanced weight distribution. The emulative control allows the weighing system to work even in case of failure of one cell, until its replacement. The Software Optimation is given for free. This Software allows you to run certain activities such as calibration or monitoring directly from your computer. The Optimation software is provided by Pavone Systems and guarantees a perfect instrument run.
TECHNICAL SPECIFICATIONS UWT 6008
Measuring range: -3.9 ÷ +3.9 mV/V
Input sensitivity: 0.02 µV/count
Full scale non-Linearity: <0.01%
Gain drift: < 0.001% FS/°C
Display: 128 x 64-pixel graphic LCD
A/D Converter: 24 bits
Internal Resolution: > 16.000.000 points
Trasducer input voltage: 5 Vdc (230 mA max.)
Frequency signal acquisition: 12,5 ÷ 300 Hz
Visible resolution (in divisions): 999999
Divisions value (adjustable): x1, x2, x5, x10, x20, x50
Decimal figures range: 0 ÷ 4
Temperature range: -10 ÷ + 50°C (max. humidity: 85% without condensation)
Storage temperature: -20 ÷ +70°C
Filter: 5 ÷ 250 Hz
Logic output: 2 relays, Max. 48 Vac/Vdc, 2A each
Logic input: 2 opto-isolated at 12/24 Vdc PNP (external power supply)
Serial port: 1 USB device + 1 RS232C + 1 RS485
Analog output Non-Linearity: < 0,02%
Temperature drift analog output: 0,001% FS / °C
Power supply: 12-24 Vdc ±15% - power consumption 4 W
Microcontroller: ARM Cortex M0+ at 32 bits, 256KB Flash reprogrammable on-board from USB
Data storage: 64 Kbytes expandable up to 1024 Kbytes
Regulatory compliance: EN61000-6-2, EN61000-6-3 for EMC; EN61010-1 for Electrical Safety, EN45501 for metrology
Number of load cells: 1 ÷ 8
Dimensions: 100 x 75 x 110 mm (L x H x P)
Instructions for the use of the weight transmitter UWT 6008
The UWT 6008 Analog weight transmitter has been designed by Pavone Systems. This weight trasnsmitter is a unique product since it is suitable to all industrial applications where it is necessary to know the load distribution on the different cells. The UWT 6008 Analog is able to monitor all load cells and generate alarms due to excessive cell signal drift, missing connections, failures in load cells and unbalanced weight distribution. The emulative control allows the weighing system to work even when a load cell is broken, until its replacement. The Software Optimation is given for free. This Software allows you to run certain activities such as calibration or monitoring directly from your computer. The Optimation software is provided by Pavone Systems and guarantees a perfect instrument run.
TECHNICAL SPECIFICATIONS UWT 6008
Measuring range: -3.9 ÷ +3.9 mV/V
Input sensitivity: 0.02 µV/count
Full scale non-Linearity: <0.01%
Gain drift: < 0.001% FS/°C
Display: 128 x 64-pixel graphic LCD
A/D Converter: 24 bits
Internal Resolution: > 16.000.000 points
Trasducer input voltage: 5 Vdc (230 mA max.)
Frequency signal acquisition: 12.5 ÷ 300 Hz
Visible resolution (in divisions): 999999
Divisions value (adjustable): x1, x2, x5, x10, x20, x50
Decimal figures range: 0 ÷ 4
Temperature range: -10 ÷ + 50°C (humidity max 85% no condensation)
Storage temperature: -20 ÷ +70°C
Filter: 5 ÷ 250 Hz
Logic output: 2 relays, Max. 48 Vac/Vdc, 2A each
Logic input: 2 opto-isolated at 12/24 Vdc PNP (external power supply)
Serial port: 1 USB device + 1 RS232C + 1 RS485
Analog output Non-Linearity: < 0,02%
Temperature drift analog output: 0,001% FS / °C
Power supply: 12-24 Vdc ±15% - Power consumption 4 W
Microcontroller: ARM Cortex M0+ at 32 bits, 256KB Flash reprogrammable on-board from USB
Data storage: 64 Kbytes expandable up to 1024 Kbytes
Regulatory compliance: EN61000-6-2, EN61000-6-3 for EMC; EN61010-1 for Electrical Safety, EN45501 for metrology
Number of load cells: 1 ÷ 8
Analog output: 16-bit opto-isolated Voltage: 0 ÷ 5/10 V (min. R: 10 K Ohm), Current: 0/4 ÷ 20 mA (max. R: 300 Ohm).
Dimensions: 100 x 75 x 110 mm (L x H x P)
Instructions for the use of the weight transmitter UWT 6008
The UWT 6008 weight transmitter comes from the Pavone Systems experience. It is a unique product in the weight transmitter family and is ideal for all industrial applications where it is necessary to know the load distribution on the different cells. It is able to monitor all load cells and generate alarms due to excessive cell signal drift, missing connections, failure of one of the cells, unbalanced weight distribution. The emulative control allows the continuity of work of the weighing system even in case of failure on one of the load cells, up to the replacement of the same. The Software Optimation is given for free. This Software allows you to run certain activities such as calibration or monitoring directly from your computer. The Optimation software is provided by Pavone Systems and guarantees a perfect.
TECHNICAL SPECIFICATIONS UWT 6008
Measuring range: -3.9 ÷ +3.9 mV/V
Input sensitivity: 0.02 µV/count
Full scale non-Linearity: <0.01%
Gain drift: < 0.001% FS/°C
Display: 128 x 64-pixel graphic LCD
A/D Converter: 24 bits
Internal Resolution: > 16.000.000 points
Trasducer input voltage: 5 Vdc (max. 230 mA)
Frequency signal acquisition: 12.5 ÷ 300 Hz
Visible resolution (in divisions): 999999
Divisions value (adjustable): x1, x2, x5, x10, x20, x50
Decimal figures range: 0 ÷ 4
Temperature range: -10 ÷ + 50°C (humidity max 85% no condensation)
Storage temperature: -20 ÷ +70°C
Filter: 5 ÷ 250 Hz
Logic output: 2 relays, Max. 48 Vac/Vdc, 2A each
Logic input: 2 opto-isolated at 12/24 Vdc PNP (external power supply)
Serial port: 1 USB device + 1 RS232C + 1 RS485, Fieldbus, ASCII or Modbus RTU
Analog output Non-Linearity: < 0,02%
Temperature drift analog output: 0,001% FS/°C
Power supply: 12-24 Vdc ±15% - Power consumption 4 W
Microcontroller: ARM Cortex M0+ at 32 bits, 256KB Flash reprogrammable on-board from USB
Data storage: 64 Kbytes expandable up to 1024 Kbytes
Regulatory compliance: EN61000-6-2, EN61000-6-3 for EMC; EN61010-1 for Electrical Safety, EN45501 for metrology
Number of load cells: 1 ÷ 8
Dimensions: 100 x 75 x 110 mm (L x H x P)
Instructions for the use of the weight transmitter UWT 6008
Software Optimation Functions
Live reading of all legs
UWT6008 can show the mV/V signal of all the load cells or the relative percentages and the total in order to easily identify problems and structural imbalances.
LOAD CELLS EMULATION
When one of the load cells is damaged or disconnected, UWT6008 display error code an “ERR CEL X” and alert user instantly.
By pressing the PRG key, the faulty cell is excluded from the weighing system that will continue to operate.
When the faulty cell is repaired or replaced, the device will automatically recognize it by including it again in the weighing system, without the need for further intervention by the operator.
The UWT 6008 weight transmitter comes from the Pavone Systems experience. It is a unique product in the weight transmitter family and is ideal for all industrial applications where it is necessary to know the load distribution on the different cells. It is able to monitor all load cells and generate alarms due to excessive cell signal drift, missing connections, failure of one of the cells, unbalanced weight distribution. The emulative control allows the continuity of work of the weighing system even in case of failure on one of the load cells, up to the replacement of the same. The Software Optimation is given for free. This Software allows you to run certain activities such as calibration or monitoring directly from your computer. The Optimation software is provided by Pavone Systems and guarantees a perfect.
