Among the weight transmitters, DAT 11 is the fastest to receive, convert and transmit data thanks to a more performing A/D converter. Thanks to its small size and compact design, the DAT 11 weight transmitter can be inserted in any work environment without taking up too much space. DAT 11 is a customizable product that has a mechanical keyboard with a programmable key block from which it is possible to manually set the weight filter with predetermined values or with individually adjustable parameters. The DAT 11 weight transmitter features removable screw terminal blocks, selectable logic input function, voltage or current analog input, unipolar or bipolar analog output, RS485 junction box connection and peak hold function for dynamic measurements. DAT 11 is a product in step with the times. It complies with EN45501, and the Fieldbus data are updated to 125Hz. Compared to traditional weight transmitters, DAT 11 contains a USB port which allows the firmware update, the connection to the Optimation software and the connection to TESTER 1008, which facilitates calibration and troubleshooting. DAT 11 is able to perform various calibrations: "Dead Weight", "Theoretical" and "Data Sheet". In addition, it presents the linearization of the weight calibration on 5 points. Developed specifically by Pavone Weighing Systems and installed free of charge in the weighing instrument, the Optimation software allows you to simplify and perform various operations such as configuring the instrument and correctly and safely saving data through the DATALOGGER function.
TECHNICAL DAT 11
Measuring range: -7.6 ÷ +7.6 mV/V
Input sensitivity: 0.02 µV/count
Full scale non-Linearity: <0.01%
Gain drift: < 0.002% FS/°C
Display: 6 digit, 7-segment LED red, height 8mm
A/D Converter: 24 bit
Internal Resolution: > di 16.000.000 points
Frequency signal acquisition: 13 ÷ 1.000 Hz
Visible resolution (in divisions): 999999
Divisions value (adjustable): x1, x2, x5, x10, x20, x50
Decimal figures range: 0 ÷ 4
Temperature range: -10 ÷ +50°C (max umidity 85% without condensation)
The ATEX MC 315 weight indicator, designed and manufactured by Pavone Weighing Systems in accordance with Directive 2014/34/EU and in compliance with EN 60079-0:2018, EN 60079-11:2012, EN 60079-26:2015, is a weighing instrument with ATEX certification that can be used in environments with potentially explosive atmospheres, particularly in zones ATEX 1, 21 and in zones ATEX 2, 22 (1 and 2 for gases, 21 and 22 for dust). The low energy used by the weight indicator is not sufficient to trigger explosions neither with electrical sparks nor with excessive temperatures (class T4), thus making the use of the ATEX MC 315 weight indicator safe in areas with risk of explosion. The fiber optic connection of the ATEX MC 315 weight indicator allows the necessary information to be brought to the safe area without Zener barriers to obtain the voltage or current analogue output via the S318 interface. As an alternative to the RS232 and RS485 ports, Pavone Weighing Systems provides the following Fieldbuses: Profibus, Profinet, Ethernet IP, Ethercat.
TECHNICAL CHARACTERISTICS MC 315 (ATEX 1, 21 and 2, 22)
Measuring range:
-3,9 ÷ +3,9 mV/V
Input sensitivity:
0.02 µV/count
Full scale non-Linearity:
<0.01% of full scale
Gain drift:
<0.002% of full scale / °C
A/D Converter:
24 bit
Visible resolution (in divisions):
up to 999.999 divisions on payload
Decimal figures range:
0 ÷ 4
Temperature range:
-10 ÷ +40 °C
Storage temperature:
-20 ÷ +50 °C
Filter:
0.25 ÷ 50 Hz
Logic output:
6 photorelay, max 24 Vcc/100mA each
Logic input:
2 optoisolated 12 ÷ 24 Vcc PNP (external power supply)
Serial port:
2 x RS485 with ASCII or Modbus RTU protocols; maximum cable lenght = 200 meters
Fiber optic ports:
1 x FULL DUPLEX with data transmission to S318 card in safe area; Duplex type cable with Plastic Optical Fiber of 1 mm (ex: COP-1002-HD) and maximum length of 50 meters
Power supply:
100 ÷ 250 Vac from AL-AX certified power supply or from 6V battery via AL-BX barrier (in safe area)
Regulatory compliance:
for EMC = EN61000-6-2, EN61000-6-3; for Electrical Safety = EN61010-1; for ATEX = EN60079-0, EN60079-11, EN60079-26
Fieldbus:
Profibus, Profinet, Ethernet IP, Ethercat
Trasducer input voltage:
3.3 V (max 4 load cells 350 Ohm)
ATEX MC 315 is undoubtedly the best ATEX certified weight indicator available on the market. Designed and developed ad hoc with proprietary engineering and technologies, ATEX MC 315 digital weight indicator can be used in environments with potentially explosive atmospheres.
Our stainless steel weight indicator is an innovative product: extremely compact design, intuitive and optimized hardware-software integration, low energy consumption operation, data transmission via optical fiber or fieldbus. All this at a cost equal to one third of the competition price! The price includes a premium customer service that provides assistance in real time through online video tutorial, telephone calls or visits on site by our senior technicians, who will be at your disposal for any problem. All these characteristics make ATEX weight indicator MC 315 a unique product, which is incomparable to any other proposals currently present on the market.
MC 315 weight indicator has a number of innovative features that make it unique:
specifically designed for the ATEX certifications
the most compact and lightest among the weight indicators
ideal for a wide range of applications
extremely advantaegous cost
free software
free telephone assistance
free online assistance
on site assistance
available with fieldbus
What is more, the digital weight indicator MC 315 is completely designed and developed by Pavone Weighing Systems and meets 100% the standards established by the ATEX certifications. This means that Pavone Weighing Systems designs, develops, provides assistance and takes complete responsibility for the accuracy of an entirely made-in-Italy product and its compliance with the ATEX standards.
This is a crucial difference compared to companies that simply assemble a transmitter and decline any responsibility for loss of efficiency and malfunctions.
ATEX certification: innovation and safety at the top of the standards
The production of weight indicators has so far mainly consisted in standard products placed in boxes flameproof.
ATEX MC 315 makes a step forward creating a new generation weight indicator since it has been designed on the basis of the ATEX standards, with internal cards that completely comply with directive ATEX 2014/34/UE (entered into force on 16/04/2016). ATEX MC 315 can be used in areas ATEX 1, 21 and in areas ATEX 2, 22 (1 and 2 for gases, 21 and 22 for dusts).
The power supply is low energy (100 ÷ 250 Vac) in order to avoid triggering explosions with electrical sparks or with excessive temperatures (class T4). This makes it a safe tool in areas with danger of explosion.
In the realization of the weight indicator ATEX MC 315, Pavone Weighing Systems has met the most recent norms. In so doing, it has guaranteed a digital weight indicator that is longer lasting and safer than the ones still on the market. Pavone Weighing Systems’ technicians have worked alongside expert consultants following the ATEX regulations on components, materials, modus operandi and assembly up to the conclusion of the long and complex procedure that led to the Bureau Veritas certification, a quality certification body in charge of analysing and certifying the design and the manufacture. The protection methods used have obtained the EU Type Examination Certificate relatively to the design and the Notification of Production Quality (as regards the manufacture).
Working in environments with flammable gases, vapors and mists (zone 1), the Pavone Weighing Systems weight indicator can be interfaced with load cells installed in zone 0. The IIC mark makes ATEX MC 315 suitable for environments with the presence of hydrogen, acetylene and carbon disulfide. In environments with flammable dusts and fuels (zone 21), the weight indicator can interface with load cells installed in zone 20. The IIIC mark makes it suitable for working with conductive powders.
ATEX MC 315 is therefore an intrinsically safe ATEX instrument that responds to the most current international certifications. ATEX standards are harmonized on ISO 9001: 2015 standards.
Compact and ergonomic weight indicator
The ATEX MC 315 weight indicator has been designed to fit into spaces and measurement conditions.
No more 40-50 kilos explosion proof boxes: the R&D department of Pavone has created an indicator of very small dimensions (230x175x97mm) and a weight (1.7 kg) which makes it easily transportable anywhere.
Such a revolution means ease of assembly, less occupation of space and more practicality. The use of the fiber optic cable establishes a new one standard of flexibility in terms of connections, eliminating the need for bulky cables and particularly complex connections.
And stop also to the remote buttons, with all the problems that arise as a result. Now, thanks to the sensitivity of the controls, it is possible to personalize them and set multifunctional buttons as well as to customize the label, the welcome message and the software, with which one can remote applications.
Industrial applications
Low weight and reduced dimensions, along with the technology developed by Pavone Weighing Systems, make ATEX MC 315 a versatile product that can be used in a wide range of applications. Not only can ATEX MC 315 be used in the chemical, petrochemical and mineral sector, but it can also be applied in the paint, pharmaceutical and food industry (i.e. sugar factories and food alcohol industries).
The fiber optic connection allows you to bring the necessary information to a safe area, without the use of Zener barriers. This solution increases the implementation possibilities in various sectors. The native and integrated hardware-software system of Pavone Weighing Systems guarantees the interfacing with all automation processes at industrial level, and makes ATEX MC 315 compatible with all PLC on the market.
Cost-effective
ATEX weight indicator: top quality at a fair price! You spend one third of the competition price. The extreme quality of such an innovative product also consists in the advantage of purchasing a top quality compact weight indicator at a fair price.
The optimization favored by a completely internal production makes it possible to offer the stainless steel weight indicator at an extremely advantageous price, which is up to 70% lower than the current avarage in the digital weight indicators.
With the pluses of a unique system of its kind, built ad hoc and guaranteed for one year by Pavone Weighing Systems.
Premium assistance
The purchase of ATEX MC 315 includes a direct and detailed support by Pavone Weighing Systems. No tickets or long response times: premium support included in the product allows the user to contact the company's technical department by phone (On Call mode), talk to staff who speaks the same language and have a real-time response for the resolution of problems.
Online assistance is also available via email or online video tutorials that illustrate how to deal with certain topics related to the use of the weight indicator. All the assistance modalities, both online or on call, are immediate and free. The request for on-site assistance by a Pavone Weighing Systems technician comes at a highly sustainable cost, about a quarter of the cost of most brands competitors.
The weight transmitter DAT 200 Ethercat has high performance and long-term reliability. The configuration and calibration can be set up directly from the front panel. The small width dimensions allow to place a large number of transmitters inside the electrical automation panels. The weight transmitter DAT 200 Ethercat has an interface with intrinsically safe barriers for use in hazardous areas. The weight transmitter DAT 200 Ethercat can be customized according to customer needs.
TECHNICAL DAT 200 / PROFINET
Measuring range: -4 ÷ +4 mV/V
Input sensitivity: 0.02 µV/count
Full scale non-Linearity: < 0.01%
Gain drift: < 0.001% FS/°C
Display: 5 digit, red LED (7 segments), h 7 mm
A/D Converter: 24 bit
Internal Resolution: 16.000.000 counts
Trasducer input voltage: 4 V (max 4 cells 350 Ohm)
Visible resolution (in divisions): 999999
Divisions value (adjustable): 0.001÷50 adjustable
Temperature range: -10 ÷ +50°C (max umidity 85% without condensation)
Storage temperature: -20 ÷ +60°C
Filter: 0.02 ÷ 25 Hz
Serial port: RS232C half duplex with ASCII protocol
Power supply: 24 Vcc ±10% – power 2 W
Regulatory compliance: EN61000-6-2, EN61000-6-3 for EMC; EN61010-1 for electrical security
The weighing instrument PKD 3000 batch is a multifunction weight microcontroller used in industrial systems. The dosing instrument PKD 3000 batch manages up to 8 load cells and up to 4 independent scales and can be connected to printers and labellers using the available control drivers. Calibration and linearization up to 8 points can be programmed directly from the digital keyboard or from a PC. The dosing instrument PKD 3000 batch can be customized and adapted to customer needs. PKD 3000 disposes of 4 availble software versions: BATCH 1, BATCH, BELT and CHECK.
TECHNICAL SPECIFICATIONS
Measuring range: 0.6 mV/V ÷ 3.2 mV/V
Input sensitivity: 0.03 µV/count
A/D Converter: 24 bit
Degree of protection: IP65
Visible resolution (in divisions): > 800.000 points
Temperature range: -10 ÷ +50 °C
Logic output: Max 16 optoisolated outputs 48 Vac / 60 Vdc 0.15 A / 0.15 A
MCT 1302 Batch meets various needs in the weighing field: from simple management of level thresholds to complicated dosing procedures. The MCT 1302 Batch weighing solution is able to totalize the dosed weights divided by recipe and to store up to 100 different recipes with 20 steps. With an expandable memory, it can save up to 1000 recipes with 20 steps. The MCT 1302 Batch has a touch screen, an upload and download function for programming via TESTER 1008 and useful software for programming and saving recipes directly on the PC and transmitted via USB. MCT 1302 Batch has 6 logic inputs and 6 logic outputs and 4 optional Fieldbus: Profinet, Ethernet IP, Ethercat and Profibus. The MCT 1302 Batch dosing instrument can be customized according to customer needs.
TECHNICAL SPECIFICATIONS
Measuring range: -3.9 ÷ +3.9 mV/V
Input sensitivity: 0.02 µV/count
Full scale non-Linearity: <0.01 % full scale
Gain drift: < 0.001% FS/°C
Display: graphic LCD (240x128 pixel)
A/D Converter: 24 bit; internal resolution up to 16.000.000
specifically designed for the ATEX certifications
