Multi-Converter Lineup / Specifications
 

Multi-Converter for SP5000 Series

　 Product image Model no. Details Storage Backup
memory		 No. of
connected
drivers		 Resolutions Interface
Base
module

Open Box		 PFXSP5B41 Specifications CFast card
+
SD card		 NVRAM
320KB		 4 WUXGA
XGA
SVGA		 Serial × 2
Ethernet × 2
USB (Type A) × 3
USB (mini B) × 1
DVI-D Output × 1
MIC Input/LINE Input,
LINE Output


Power Box		 PFXSP5B10 Specifications SD card XGA
SVGA		 Serial × 2
Ethernet × 2
USB (Type A) × 2
USB (mini B) × 1
LINE Output


Standard Box		 PFXSP5B00 Specifications XGA Serial × 2
Ethernet × 2
USB (Type A) × 2
USB (mini B) × 1

 

 

Adapter              

             		 PFXZCDADEXP1 Adapter to attach a DIN rail, and mount SP5000 Series Box Module on a wall of control cabinet.
Equipped with Ethernet I/F x 1 and status LED.

* When mounting on a wall, an installation fastener (Model No. PFXZSPADWM1) is required separately.
* SP5000 Series Box Module can be used alone with this adapter.

Detailed information about Multi-Converter for SP5000 Series
 

Multi-Converter for LT4000M Series

　 Product image Model no.

Details

 Storage Backup
memory		 No. of
connected
drivers		 Resolutions Interface DIO AIO
Base
module		 PFXLM4B01DAC Specifications - nvSRAM
128KB		 4 QVGA Serial
× 1

Ethernet
× 1

USB
(Type A)
× 1

USB
(mini B)
× 1

CANopen
master
× 1		 IN12、
OUT6
(Source)		 IN4,
OUT2
PFXLM4B01DAK Specifications IN12、
OUT6
(Sink)
PFXLM4B01DDC Specifications IN20、
OUT10
(Source)		 -
PFXLM4B01DDK Specifications IN20、
OUT10
(Sink)

 

 

Adapter              

             		 PFXZXMADSA1 DIN rail installation adapter for rear modules

Detailed information about Multi-Converter for LT4000M Series
 

Multi-Converter for GP4000M Series

　 Product image Model no.

Details

 Storage Backup
memory		 No. of
connected
drivers		 Resolutions Interface
Base module PFXGM4B01D Specifications - nvSRAM
128KB		 2 QVGA Serial × 1
Ethernet × 1
USB (Type A) × 1
USB (mini B) × 1

 

 

Adapter              

             		 PFXZXMADSA1 DIN rail installation adapter for rear modules

Detailed information about Multi-Converter for GP4000M Series
 

Multi-Converter for FANUC CNC

Product image Model no.

Details

 Interface DI (Digital Input) AI (Analog Input)
PFXLM4B01DAKFF Specifications Serial × 1
Ethernet × 1
USB (Type A) × 1
USB (mini B) × 1		 IN12 (Sink, Source) IN2

Detailed information about Multi-Converter for FANUC CNC

 

While maintaining or transferring a project file, you can confirm a setup works correctly or not by using a display module.
 
 

 
 

Multi-Converter Support / Downloads
 

Catalog
 
 

 
 

Multi-Converter Options
 

Serial Interface (Cable)

Product Name Model No. Description Supported Models
SP5000
Open
Box		 SP5000
Power
Box		 SP5000
Standard
Box		 LT4000M GP4000M FANUC
RS-232C Cable (5m) PFXZLMCBRJR21 Cable with loose wires at one end
for RS-232C connection between
various hosts and Multi-Converter.		       ✔ ✔  
CA3-CBL232/5M-01 Connects a host controller
to the GP unit. (RS-232C)		 ✔ ✔ ✔   ✔  
RS-422 Cable (5m) PFXZLMCBRJR81 Cable with loose wires at one end
for RS-485 connection between
various hosts and Multi-Converter.		       ✔ ✔  
CA3-CBL422/5M-01 Connects a host controller
to Multi-Converter. (RS-422)		 ✔ ✔ ✔   ✔  
CA3-CBL422-01         ✔  
Mitsubishi PLC Q-Series
Link Cable (5m)		 CA3-CBLLNKMQ-01 Connects Mitsubishi PLC Q-Series
(or other host controller) to
Multi-Converter. (RS-232C)		 ✔ ✔ ✔   ✔  
Omron PLC SYSMAC
Link Cable (5m)		 CA3-CBLSYS-01 Connects Omron PLC
SYSMAC Series unit
(or other host controller) to
Multi-Converter. (RS-232C)		 ✔ ✔ ✔   ✔  
Mitsubishi PLC A-Series
Connection Cable (5m)		 CA3-CBLA-01 Connects Mitsubishi PLC A,
QnA Series programming
console I/F to Multi-Converter.
(Simultaneous use of programming
console is not possible.)		 ✔ ✔ ✔   ✔  
Mitsubishi PLC Q-Series
Connection Cable (5m)		 CA3-CBLQ-01 Connects Mitsubishi PLC
Q-Series programming
console I/F to Multi-Converter.
(Simultaneous use of programming
console is not possible.)		 ✔ ✔ ✔   ✔  
Mitsubishi PLC FX-Series
Connection Cable (1m)		 CA3-CBLFX/1M-01 Connects Mitsubishi PLC FX-Series
programming console I/F and
Multi-Converter. (Simultaneous use
of programming console is not possible.)		 ✔ ✔ ✔   ✔  
Mitsubishi PLC FX-Series
Connection Cable (5m)		 CA3-CBLFX/5M-01 ✔ ✔ ✔   ✔  
2 Port Adapter Cable (5m) CA3-MDCB11 Connects Mitsubishi PLC to
Multi-Converter using 2 port adapter II
(RS-422).		         ✔  
Mitsubishi PLC A, QnA, FX Series
2 Port Adapter II		 GP070-MD11 Allows simultaneous use of
Multi-Converter and a
Mitsubishi PLC A, QnA,
FX Series peripheral device.		         ✔  
Terminal Block
Conversion Adapter		 CA3-ADPTRM-01 Connects output from a serial interface
with an RS-422 terminal block.		         ✔  
COM Port
Conversion Adapter		 CA3-ADPCOM-01 Connects optional RS-422 communication
items to Multi-Converter's COM1 port.		 ✔ ✔ ✔   ✔  
Multi-Link Cable (5m) CA3-CBLMLT-01 Connects a host controller to
Multi-Converter for multi-link (n:1)
communication.		         ✔  
9-pin-to-25-pin RS-232C
Conversion Cable (0.2m)		 CA3-CBLCBT232-01 Connects a standard RS-232C cable
(Multi-Converter Connector,
D-Sub 25-pin) to Multi-Converter.		 ✔ ✔ ✔   ✔  

9-pin-to-25-pin RS-422
Conversion Cable (0.2m)

 CA3-CBLCBT422-01 ✔ ✔ ✔   ✔  
MPI Cable (3.5m) ST03-A2B-MPI21-PFE Connects a host controller to
Multi-Converter for MPI communication.		 ✔ ✔ ✔   ✔  
RS-422 Terminal Block
Conversion Adapter		 PFXZCBADTM1 Connects output from Multi-Converter’s
Serial Interface (D-sub 9 pin plug)
directly with an RS-422 terminal block.		 ✔ ✔ ✔      
RS-232C Isolation Unit CA3-ISO232-01 Unit for connecting various hosts and
Multi-Converter by insulating.
(RS-232C/RS-422 Switch)		 ✔ ✔ ✔      
FANUC CNC
Connection Cable (5m)		 PFXZLMCBRJR22 A serial communication cable for connecting
this product to FANUC CNC.		           ✔
 

USB Interface (Unit / Cable)

Product Name Model No. Description Supported Models
SP5000
Open
Box		 SP5000
Power
Box		 SP5000
Standard
Box		 LT4000M GP4000M FANUC
EZ Tower Light
tube mounting with fixing plate		 PFXZCETWHA1 USB Connection Type Monolithic
EZ Tower Light tube mounting
with fixing plate.
(link is external)		 ✔ ✔ ✔ ✔ ✔  
EZ Tower Light
with base mounting		 PFXZCETWW1 USB Connection Type Monolithic
EZ Tower with base mounting.
(link is external)		 ✔ ✔ ✔ ✔ ✔  
EZ Illuminated Switch PFXZCCEUSG1 A unit of 5 illuminated switches
with multiple color LED easily
connected with HMI via USB.
(link is external)		 ✔ ✔ ✔ ✔ ✔  
EZ Numpad PFXZCCEUKB1 A unit of ten-key pad easily
connected with HMI via USB.
(link is external)		 ✔ ✔ ✔ ✔ ✔  
EZ Fingerprint Recognition Unit PFXZCCEUSS1 A unit of fingerprint identification
easily connected with HMI via USB.
(link is external)		 ✔ ✔ ✔ ✔ ✔  
USB Transfer Cable (1.8 m) ZC9USCBMB1 Cable for transferring screen data
between a PC (USB Type A) and
Multi-Converter (USB mini- B).		 ✔ ✔ ✔ ✔ ✔ ✔
USB Transfer Cable (2m) CA3-USBCB-01 Cable for transferring screen data
between a PC (USB Type A) and
Multi-Converter (USB Type A).		 ✔ ✔ ✔ ✔ ✔ ✔
USB Front Cable (1m) CA5-USBEXT-01 Extension cable for attaching
to USB port on front panel.		 ✔ ✔ ✔ ✔ ✔ ✔
USB Panel-mount
Extension Cable (1m)		 ZC9USEXMB1 Extension cable that attaches to
the USB (mini-B) interface on the
front side of the operation panel.		 ✔ ✔ ✔ ✔ ✔ ✔
USB Cable (5m) FP-US00 Connects a USB printer.
(TYPE-B)		 ✔ ✔ ✔ ✔ ✔  
USB-Serial (RS-232C)
Conversion Cable (50cm)		 CA6-USB232-01 Cable for converting Multi-Converter’s
USB interface into a serial interface
(RS-232C). Allows connection to
modems or barcode readers that
support RS-232C.		 　 ✔ ✔ 　 　  
USB-Serial (RS-422/485)
Conversion Adapter		 PFXZCBCBCVUSR41 Cable for connecting Multi-Converter
(USB Type A) with an external
device (RS-422/RS-485)		 　 ✔ ✔ 　 ✔  
USB Clamp mini-B (1 port) ZC9USCLMB1 Clamp to prevent disconnection
of USB cable (USB/mini-B,
1 port, 5 clamps/set).		 ✔ ✔ ✔ 　 　  
 

Software

* "* *" is changed with the version of software.
Product Name Model No. Description Supported Models
SP5000
Open
Box		 SP5000
Power
Box		 SP5000
Standard
Box		 LT4000M GP4000M FANUC
GP-Pro EX PFXEXEDV** Screen Creation Software ✔
Ver.
4.06.300
or later		 ✔
Ver.
4.08
or later		 ✔
Ver.
4.08.200
or later		 ✔
Ver.
3.60
or later		 ✔
Ver.
3.60
or later		  
GP-Pro EX Editor License PFXEXEDLS** GP-Pro EX Editor License
(1 License)*1		 ✔ ✔ ✔ ✔ ✔  
GP-Pro EX Editor
Group License		 10 License PFXEXGRPLS**10 GP-Pro EX Editor
Group License *2		 ✔ ✔ ✔ ✔ ✔  
25 License PFXEXGRPLS**25 ✔ ✔ ✔ ✔ ✔  
50 License PFXEXGRPLS**50 ✔ ✔ ✔ ✔ ✔  
Pro-Server EX PFXEXSDVV** Software that connects a PC
to a LT via Ethernet and
collects and transmits data *3		 ✔
Ver.
1.34
or later		 ✔
Ver.
1.36
or later		   ✔
Ver.
1.33
or later		 ✔
Ver.
1.33
or later		  
Pro-Server EX Developer License EX-SED-LICENSE Pro-Server EX
Developer License *4		 ✔ ✔   ✔ ✔  
Pro-Server EX Runtime License EX-SRT-LICENSE Pro-Server EX
Runtime License *5		 ✔ ✔   ✔ ✔  
MES Action License EX-MES-LICENSE-V10 License key permitting Pro-Server EX
to access a database		 ✔ ✔   ✔ ✔  
GP-Viewer EX 1 License EX-VIEWER-LICENSE License allowing a PC to access
a LT in remote mode. *6		 ✔ ✔ ✔ ✔ ✔  
10 License EX-VIEWER-LICENSE-10 ✔ ✔ ✔ ✔ ✔  
30 License EX-VIEWER-LICENSE-30 ✔ ✔ ✔ ✔ ✔  
Pro-face Remote HMI
(iPhone、iPad、iPod touch) V*.*		 PFXEXRHIOSV** Software to operate Pro-face HMI
screen on iPhone, iPad and iPod touch		 ✔ ✔ ✔ ✔ ✔  
Pro-face Remote HMI
(Android) V*.*		 PFXEXRHANDV** Software to operate Pro-face HMI
screen on Android OS		 ✔ ✔ ✔ ✔ ✔  
Pro-face Remote HMI Free
(Android) V*.*		 PFXEXRHANDTRV** Free software to operate Pro-face
HMI screen on tablets or
smartphones with Android OS		 ✔ ✔ ✔ ✔ ✔  
Pro-face Remote HMI Server PFXEXRHSLS Software to operate Windows programs
via the Pro-face Remote HMI APP
on any Android or iOS device,
single license*6		 ✔ 　   　 　  
Pro-face
Remote
HMI Client
for Win		 Single license PFXEXRHCLS Software for remote viewing of
Pro-face HMI from desktop PC
(license key code)		 ✔ 　✔ ✔ ✔ ✔  
10 licenses PFXEXRHCLS10
30 licensesス PFXEXRHCLS30
Pro-face Connect PFXCONFREE30 Secure remote access to display or
operate the screen of Pro-face HMI
in remote locations on Windows PC
or tablet.
Trial package running 30 days
(license key code)
See the product page about
the other licenses.(link is external)		 ✔ ✔ ✔      
 

Others

Product Name Model No. Description Supported Models
SP5000
Open
Box		 SP5000
Power
Box		 SP5000
Standard
Box		 LT4000M GP4000M FANUC
DVI-D Cable (5m) FP-DV01-50 DVI-D cable used to send the image
signal from this product to Pro-face's
flat panel displays and other
commercial-type displays. DVI 1.0
compliant (DVI-D 24-pin plug) (5 m).		 ✔ 　   　 　  
DC Power Supply Connector (Angle type) PFXZCBCNDC2 Right-angle connector to connect
DC power supply cables (5 pcs/set)		 ✔ ✔ ✔ 　 　  
AUX Connector PFXZCDCNAUX1 AUX connector required in case an
external output is used (5 pcs/set).		 ✔ ✔   　 　  
Wall Mount Adapter PFXZSPADWM1 Adapter to mount Multi-Converter
on a wall of control cabinet.		 ✔ ✔ ✔ 　 　  
SD Memory Card (4GB) *7 PFXZCBSD4GC41 SD Memory Card for Storage
(4GB, MLC, CLASS4)		 ✔ ✔ ✔ 　 　  
CFast card (32GB) *7 PFXZCDSCCFA321 CFast Card for Storage
(32GB, SLC)		 ✔ 　   　 　  
Battery for Memory Backup *8 PFXZCBBT1 Primary battery for memory and
time data backup (1 piece)		 ✔ ✔ ✔ 　 　  
 

Maintenance (Please purchase when the product is damage or lost.)

Product Name Model No. Description Supported Models
SP5000
Open
Box		 SP5000
Power
Box		 SP5000
Standard
Box		 LT4000M GP4000M FANUC
Accessories Kit PFXZGMAK1 Anti-rotation tee, USB cable
clamp to prevent disconnection
(Type A, mini-B, for 1 port),
2mm-high spacer to adjust
installation panel thickness
(1pcs/each).		 　 　   ✔ ✔ ✔
DC Power Supply Connector (Straight) PFXZGMCNDC1 Connector to connect
DC power supply cable
(5 pcs/set).		 　 　   ✔ ✔ ✔
PFXZCBCNDC1 ✔ ✔ ✔   　  
DIO Connector PFXZLMCNIO1 I/O connector 15-pin (2 pcs/set)
and I/O connector 6-pin (2 pcs/set)		 　 　   ✔ 　 ✔
USB Clamp TypeA (1 port) PFXZCBCLUSA1 Clamp to prevent disconnection
of USB cable (USB/A, 1 port,
5 clamps/set)		 ✔ ✔ ✔   　  
CFast card (16GB) PFXZCDSCCFA162 CFast Card (16 GB, MLC)
for System Card		 ✔ 　     　  
SD Memory Card (1GB) PFXZCDSD1GC61 SD Memory Card
(1 GB, SLC, Class 6)
for System Card		 　 ✔ ✔   　  
 

CANopen Slave Unit

CANopen is EN50325-4 Network Standard. Using the LT unit as a master, you can communicate over a CANopen network. 

CANopen unit

Product Name Model No. Description Others
CANopen Slave HTB Unit HTB1C0DM9LP Slave unit supporting CANopen with 12 digital inputs, 6 relay outputs and 2 transistor source outputs. Up to 7 units of EX modules can be connected. Manual(link is external)
 

EX Module

EX module is an expansion unit. 7 EX modules max. can be connected with CANopen Slave HTB unit.

Input module

Product Name Model No. Description Details
8-point Input Module EXM-DDI8DT 8-point sink-source shared type expansion unit Manual(link is external)
16-point Input Module EXM-DDI16DT 16-point sink-source shared type expansion unit
 

Output module

Product Name Model No. Description Details
8-point relay output module EXM-DRA8RT 8-point relay output (2 common) type expansion unit Manual(link is external)
16-point relay output module EXM-DRA16RT 16-point relay output (2 common) type expansion unit
8-point transistor output module EXM-DDO8UT 8-point transistor output sink type expansion unit
16-point transistor output module EXM-DDO16UK 16-point transistor output sink type expansion unit
8-point transistor output module EXM-DDO8TT 8-point transistor output source type expansion unit
16-point transistor output module EXM-DDO16TK 16-point transistor output source type expansion unit
 

Input/ Output mixed module

Product Name Model No. Description Details
4-Point Input/ 4-Point Output Module EXM-DMM8DRT 4-point input sink-source and 4-point relay output type expansion unit (1 common) mixed I/O unit Manual(link is external)
16-Point Inputs/ 8-point Relay Output Module EXM-DMM24DRF 16-point input sink-source / 8-point relay output mixed I/O type expansion unit Manual
 

Analog module

Product Name Model No. Description Details
2-ch Analog Input Module EXM-AMI2HT 2-ch analog input type expansion unit Manual(link is external)
2-ch Thermocouple Pt100 Input/ 1-ch Analog Output Module EXM-ALM3LT 2-ch analog input / 1-ch analog output type expansion unit
2-ch Analog Input/ 1-ch Analog Output Module EXM-AMM3HT 2-ch analog input / 1-ch analog output type expansion unit
1-ch Analog Output Module EXM-AMO1HT 1-ch analog output type expansion unit
4-ch Voltage, Current, Pt100/ Pt1000/ Ni100/ Ni1000 Input Module EXM-AMI4LT 4-ch Voltage, Current, Temperature Expansion Unit Manual(link is external)
2-ch Analog Output Module EXM-AVO2HT 2-ch analog output type expansion unit
4-ch Analog Input/ 2-ch Analog Output Module EXM-AMM6HT 4-ch analog input / 2-ch analog output expansion unit　
8-ch Temperature Pt100/ Pt1000 Input Module EXM-ARI8LT 8-ch temperature input type expansion unit

*1Purchase this product when using a trial version downloaded from Pro-face website as a fully functional version, or installing GP-Pro EX in a second or subsequent PCs. One license is required for each PC.

*2Group License consists of one set of Serial No./Key Code for installation on 10 PCs. (Should be used in the same office.)

*3Includes the settings editor and runtime.

*4Purchase this product when using a trial version downloaded from Pro-face website as a fully functional version, or installing the setting editor and runtime in a second or subsequent PCs. One license is required for each PC.

*5Purchase this license when using a trial version downloaded from Pro-face website as a fully functional version, or installing only runtime in subsequent PCs. One license is required for each PC.

*6Able to install from GP-Pro EX's DVD-ROM. Only license is purchased.

*7A commercial type can be also used.

*8Multi-Converter can save NVRAM (Backup memory) and RTC (Time) without battery. But when you need to keep RTC (Time) more than 100 days without turning on electricity, you need to add the option.
 
 

 
 

Multi-Converter Lineup / Specifications
 

Multi-Converter for SP5000 Series

　 Product image Model no. Details Storage Backup
memory		 No. of
connected
drivers		 Resolutions Interface
Base
module

Open Box		 PFXSP5B41 Specifications CFast card
+
SD card		 NVRAM
320KB		 4 WUXGA
XGA
SVGA		 Serial × 2
Ethernet × 2
USB (Type A) × 3
USB (mini B) × 1
DVI-D Output × 1
MIC Input/LINE Input,
LINE Output


Power Box		 PFXSP5B10 Specifications SD card XGA
SVGA		 Serial × 2
Ethernet × 2
USB (Type A) × 2
USB (mini B) × 1
LINE Output


Standard Box		 PFXSP5B00 Specifications XGA Serial × 2
Ethernet × 2
USB (Type A) × 2
USB (mini B) × 1

 

 

Adapter              

             		 PFXZCDADEXP1 Adapter to attach a DIN rail, and mount SP5000 Series Box Module on a wall of control cabinet.
Equipped with Ethernet I/F x 1 and status LED.

* When mounting on a wall, an installation fastener (Model No. PFXZSPADWM1) is required separately.
* SP5000 Series Box Module can be used alone with this adapter.

Detailed information about Multi-Converter for SP5000 Series
 

Multi-Converter for LT4000M Series

　 Product image Model no.

Details

 Storage Backup
memory		 No. of
connected
drivers		 Resolutions Interface DIO AIO
Base
module		 PFXLM4B01DAC Specifications - nvSRAM
128KB		 4 QVGA Serial
× 1

Ethernet
× 1

USB
(Type A)
× 1

USB
(mini B)
× 1

CANopen
master
× 1		 IN12、
OUT6
(Source)		 IN4,
OUT2
PFXLM4B01DAK Specifications IN12、
OUT6
(Sink)
PFXLM4B01DDC Specifications IN20、
OUT10
(Source)		 -
PFXLM4B01DDK Specifications IN20、
OUT10
(Sink)

 

 

Adapter              

             		 PFXZXMADSA1 DIN rail installation adapter for rear modules

Detailed information about Multi-Converter for LT4000M Series
 

Multi-Converter for GP4000M Series

　 Product image Model no.

Details

 Storage Backup
memory		 No. of
connected
drivers		 Resolutions Interface
Base module PFXGM4B01D Specifications - nvSRAM
128KB		 2 QVGA Serial × 1
Ethernet × 1
USB (Type A) × 1
USB (mini B) × 1

 

 

Adapter              

             		 PFXZXMADSA1 DIN rail installation adapter for rear modules

Detailed information about Multi-Converter for GP4000M Series
 

Multi-Converter for FANUC CNC

Product image Model no.

Details

 Interface DI (Digital Input) AI (Analog Input)
PFXLM4B01DAKFF Specifications Serial × 1
Ethernet × 1
USB (Type A) × 1
USB (mini B) × 1		 IN12 (Sink, Source) IN2

Detailed information about Multi-Converter for FANUC CNC

 

While maintaining or transferring a project file, you can confirm a setup works correctly or not by using a display module.
 
 

 

PFXGP4G01DNWLS

Standard product information
Family 
Hardware
Series 
Data Collection Devices
Model 
PFXGP4G01DNWLS
Sales Status 
Sale
Repair Status 
✔ (Maintenance service is available, able to be maintained.)
Specification

Electrical Specifications

Model# PFXGP4G01DNWLS
Rated input voltage 24Vdc
Input voltage limits 19.2 to 28.8Vdc
Voltage drop 5ms or less
Power consumption Maximum power consumption 11W or less
When power is not supplied to external devices 7W or less
In-rush current 30A or less
Voltage endurance 1,000 Vac, 20 mA for 1 minute (between charging and FG terminals)
Insulation resistance 500 Vdc, 10 MΩ or more (between charging and FG terminals)
 

Environmental Specifications

Model# PFXGP4G01DNWLS
Surrounding air temperature 0 to 60°C (32 to 140 °F)
Storage temperature -20 to 60°C (-4 to 140 °F)
Surrounding air and storage humidity 10% to 90% RH (Non condensing, wet bulb temperature 39 °C [102.2 °F] or less)
Dust 0.1mg/m3 (10-7 oz/ft3) or less (non-conductive levels)
Pollution degree Pollution degree 2
Corrosive gases Free of corrosive gases
Atmospheric pressure (operating altitude) 800 to 1,114 hPa (2,000 m [6,561 ft] or lower)
Vibration resistance IEC/EN 61131-2 compliant
5 to 9 Hz Single amplitude 3.5 mm (0.14 in)
9 to 150 Hz Fixed acceleration: 9.8 m/s2
X, Y, Z directions for 10 cycles (approximately 100 minutes)
Shock resistance IEC/EN 61131-2 compliant
147 m/s2, X, Y, Z directions for 3 times
Noise immunity Noise voltage: 1,000 Vp-p
Pulse duration: 1 μs
Rise time: 1 ns
(via noise simulator)
Electrostatic discharge immunity Contact discharge method: 6k V
Air discharge method: 8 kV
(IEC/EN 61000-4-2 Level 3)
 

Memory

Model# PFXGP4G01DNWLS
Application Memory Editor - GP-Pro EX: 
Media: FLASH EPROM
Screen Area *1: 32MB
User Font Area: 8MB
Logic Program Area: 132KB (Equivalent to 15,000 steps）
Free Space: None

Removable System: No
Backup Memory Editor - GP-Pro EX: 
Screen Area: SRAM 320KB
Variable Area: SRAM 64KB

Battery: Replaceable battery / Primary battery for clock data backup

*1Use the screen area when the user font area's capacity is exceeded - for example, when an image font or a picture font is used.

Interface Specifiations

Model# PFXGP4G01DNWLS
Serial interface (PLC/COM1) Asynchronous transmission: RS-232C/422/485
Data length: 7 or 8 bits
Stop bit: 1 or 2 bits
Parity: None, odd, or even
Data Transmission Speed: 2,400 to 115,200 bps
Maximum transmission distance: With RS-232: 15 m (49.2 ft), With RS-422 at 115,200 bps: 1,200 m (3,937 ft)
Serial interface (HMI) Asynchronous transmission: RS-232C/422/485
Data length: 7 or 8 bits
Stop bit: 1 or 2 bits
Parity: None, odd, or even
Data Transmission Speed: 2,400 to 115,200 bps
Maximum transmission distance: With RS-232: 15 m (49.2 ft), With RS-422 at 115,200 bps: 1,200 m (3,937 ft)
USB (Type A) interface Connector: USB2.0 (Type A) x 1
Power supply voltage: 5 Vdc ±5 %
Maximum current supplied: 500 mA/port
Maximum transmission distance: Less than 5 m (16.4 ft)
USB (mini B) interface Connector: USB2.0 (mini B) x 1
Maximum transmission distance: Less than 5 m (16.4 ft)
Ethernet interface Connector: Modular jack (RJ-45) x 1
Standard: IEEE802.3u, 10BASE-T/100BASE-TX
Maximum transmission distance: 100 m (328.1 ft)
SD Card SD Card Slot x 1
SD/SDHC card of up to 32 GB
 

Structural Specifications

Model# PFXGP4G01DNWLS
Grounding Functional grounding: Grounding resistance of 100 Ω, 2 mm2 (AWG 14) or thicker wire, or your country's applicable standard (same for FG and SG terminals).
Cooling method Natural air circulation
Structure Rating *2: Equivalent to IP20
Installation configuration: 35 mm (1.38 in) DIN rail or panel mounted (IEC 60715 compliant)
External dimensions W46 x H162 x D126 mm (W1.81 x H6.38 x D4.96 in.)
Weight 700 g (1.54 lb) or less

*2Although compliance has been confirmed under the previously mentioned test conditions, usage is not guaranteed for all environments. Be sure to check the conditions of the environment before use.

External Dimensions

IoT Dimensions
 

Dimensions with Cables

IoT Dimensions
 
 

 

  1. Proface | IoT Gateway | Downloads
  2. Proface | IoT Gateway | Options
  3. Proface | IoT Gateway | Drivers
  4. Proface | IoT Gateway | Specifications

Page 20 of 126