Clearer fonts and screen parts make an obvious difference. The clarity is not affected by zoom level
Stylish design
Stylish expression including transparent effects
Simple & Easy
One source, multiple ways to present
Use themes to easily change color set according to a person, place or situation.
View all needed information at once
BLUE provides means to combine multiple screens to one
Responsive Behavior (Dock Panel)
Adapt the size of information to meet your needs with one click on the dynamic display.
Easily identify patterns with highly flexible graph features
Using various features, including comparisons graphs, can be more expressive than ever before.
Easy to set navigation
With the navigation feature, you don't need to create screen change switches.
Reduced time for layout changes
Use grid cell editing can automatically adjust the object's size and location during layout changes.
Easy-to-understand script
Block Script makes visual programming possible.
Change the value of a variable without programming
Use a converter to change the value of a variable from the defined unit, range, scale, and expression without programming.
Connected & Secured
Pro-face connectivity
User-friendly protocols allowing you to connect your devices with ease via multiple interfaces and connect OT to IT with OPC-UA server.
Secure remote access solution
"Pro-face Connect" is a ready-to-use solution for Remote Access Over Internet on ST6000 Series without programming or configuring each device. Start using the cloud based "Pro-face Connect" Smart Industry solution on your existing network without involving your IT department. No network or firewall configurations are required and still the highest level of security and encryption is in place from end to end, from any PC, tablet and smartphone to your machinery.
Enhanced cybersecurity
Enhanced cybersecurity against basic intentional attacks
•Need admin rights to download project to HMI target •Auto user log out after predefined idle time •Doing security checking during booting •Secure Ethernet download supported by IPSec and password protected project file
BLUE is versatile software for more interactive manufacturing.
Product Features
Rich and expressive interfaces and intuitive operation
Anyone can instantly reach easily understandable information.
Responsive design shows easy-to-see and desired information.
Familiar smartphone like gestures for navigation and operation.
Just one step to show detailed information with the Zoom function.
Clearer fonts and parts make an obvious difference.
View all needed information at once. BLUE provides means to combine multiple screens to one.
Effective use of equipment information
With OPC-UA Server supported, you can transfer equipment information smoothly to a host database.
A wide variety of connection device drivers available
Numerous control devices around the world can be connected. Users can select a driver that meets their needs.
New design style reduces time for screen creation
The efficiency of the existing screen creation is improved. Diverting and customizing screens is easy.
Gesture screens can be easily created with Drag & Drop.
Using grid cell editing you can automatically adjust the object's size and location. Adjustment work of layout change is reduced.
Left Navigation is automatically generated. No need to place switches for screen change.
PFXST6200WAD
1The front face of the unit, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification. Even though the unit's level of resistance is equivalent to these standards, oils that should have no effect on the unit can possibly harm the unit. This can occur in areas where either vaporized oils are present, or where low viscosity cutting oils are allowed to adhere to the unit for long periods of time. If the unit's front face protection sheet becomes peeled off, these conditions can lead to the ingress of oil into the unit and separate protection measures are suggested. Also, if non-approved oils are present, it may cause deformation or corrosion of the front panel's plastic cover. Therefore, prior to installing the unit, be sure to confirm the type of conditions that will be present in the unit's operating environment. If the installation gasket is used for a long period of time, or if the unit and its gasket are removed from the panel, the original level of the protection cannot be guaranteed. To maintain the original protection level, be sure to replace the installation gasket regularly.
2For dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.]. Even if the installation wall thickness is within the recommended range for the "Panel Cut Dimensions", depending on wall's material, size, and installation location of GP unit and other devices, the installation wall could warp. To prevent warping, the installation surface may need to be strengthened.
PFXST6400WAD
1The front face of the unit, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification. Even though the unit's level of resistance is equivalent to these standards, oils that should have no effect on the unit can possibly harm the unit. This can occur in areas where either vaporized oils are present, or where low viscosity cutting oils are allowed to adhere to the unit for long periods of time. If the unit's front face protection sheet becomes peeled off, these conditions can lead to the ingress of oil into the unit and separate protection measures are suggested. Also, if non-approved oils are present, it may cause deformation or corrosion of the front panel's plastic cover. Therefore, prior to installing the unit, be sure to confirm the type of conditions that will be present in the unit's operating environment. If the installation gasket is used for a long period of time, or if the unit and its gasket are removed from the panel, the original level of the protection cannot be guaranteed. To maintain the original protection level, be sure to replace the installation gasket regularly.
2For dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.]. Even if the installation wall thickness is within the recommended range for the "Panel Cut Dimensions", depending on wall's material, size, and installation location of GP unit and other devices, the installation wall could warp. To prevent warping, the installation surface may need to be strengthened.
