Introducing the MicroFlex, a Micro Single Leaf Flexure, which has Solartron quality ruggedness and accuracy in a tiny package; Just 5.5 mm high.
MicroFlex - Features
Measures just 16.5 long x 5 wide x 5.5mm High
0.4mm measurement range
17-7PH Steel Body for Maximum Performance
Mounting can be accomplished using an M2 screw or gripping from the side
Axial or Right Angle cable options available
Ideal for mounting in Bore Gauge Equipment
Tungsten Carbide, Ruby, & Silicon Nitride Tip Options available
Optional pack of shims so probe is at proper level in a pocket
CC Link - New Protocol Interface Module (PIM) Technical Spec
CC Link - New Protocol Interface Module (PIM)
Communicate with up to 64 Orbit modules with Explicit Messaging
Power up to 10 Orbit modules (depending on type). (A PSIM can be used when more than 10 is required)
Connect any Solartron Digital sensor including lasers
Connect 3rd party sensors via the Analog
Solartron Metrology’s is launching a NEW Protocol Interface Module (PIM) that provides a simple way of interfacing the Orbit® Digital Measuring Network to CC Link ™ enabled PLCs.
SI 8500 Orbit Readout - Customisable Programming for an Optimised Workflow
The SI 8500 provides the opportunity to collect measurement data with the purpose of optimizing manufacturing production analysis and control. User interface has been designed to ensure all users the maximum accessible data for industrial measurement applications.
SI8500 - Features
Heavy duty aluminium casing with 10” Touch Screen. Built for an industrial environment
IP64 for front panel with four programmable keys
Connect with up to 64 Orbit Sensors
Power up to 10 modules, including contact and non-contact sensors
Easy & intuitive setup with touch screen
Build your own custom formulas
SPC and Mastering functions included
I/O Connections for automation
USB port for easy data output
Footswitch plug
Link to 3rd party sensors via Orbit connection modules, including air gauging
Benchtop (with stand) or Panel Mount options (VESA Mounting Standard)
Contact size, shape and material are critical to ensure accurate measurements, foe example a flat knife tip makes measuring external diameters much simpler than using a point tip as probe alignment is not as critical. Tungsten carbide is a good general purpose material while ruby offers longer life. Silicon Nitride is good for aluminum as Tungsten Carbide can mark aluminum parts.
Replacement Gaiters: Gaiters can be replaced when damaged. Only pneumatic push probes require gaiter rings Retrofit.
Right Angle Adaptor: For use with spring push gauging probes
Imperial Adaptor Sleeves: Adapter Sleeves can be used to increase the body diameter of 8mm sensors to 9.512 (3/8”). Available in lengths from 12 to 127 mm. Available with or without a split.
Clamping Collet: For use with all 8 mm diameter probes. The clamping collet distributes the clamping forces evenly around the probe body. Using the supplied grub screw, the probe can be loosened while holding the collet in place.
Measures just 16.5 long x 5 wide x 5.5mm High
