Cable for connecting from an EZ Tower Light to a Pro-face's interface unit.
USB Cable lock*1
XVGUZ02
Cable lock to prevent disconnection of USB cable
EZ Illuminated Switch
Product Name
Model No.
Description
Accessories Kit for EZ Illuminated Switch
PFXZCCAK1
Anti-rotation Tee, USB cable clamp to prevent disconnection (USB/B, 1 port), (5 pcs/each) *1Insert Label for EZ Illuminated Switch (3 pieces/sheet) *1
EZ Series Wall Adaptor Attachment
PFXZCEATWM1
This attachment allows you to mount the EZ Series Unit on the wall. Please use it when holding the EZ Series in your hands.
USB Front Cable (1m)
CA5-USBEXT-01
Extension cable attaching USB (Type A) interface to front panel.
2mm Spacer for panel thickness adjustment
PFXZCCAT1
2mm spacer to adjust installation panel thickness (for EZ Illuminated Switch), with φ22mm circular hole
Installation Gasket for EZ Illuminated Switch *1
PFXZCDWGSG1
Provides dust and moisture resistance when EZ Illuminated Switch is installed into a solid panel (1 piece)
Installation Nut *1
PFXZGMNT1
Nut for installation to a solid panel (10 pieces/set)
Socket Wrench *1
PFXZGMSW1
Socket wrench to tighten and loosen the installation nut (1 piece/set)
EZ Numpad
Product Name
Model No.
Description
Accessories Kit for EZ Numpad
PFXZCCAKKB1
Anti-rotation Tee (5pcs) *1, USB cable clamp to prevent disconnection (USB/mini-B, 1 port, 5pcs) *1, Function Key Label for EZ Numpad (2pcs/sheet)*1
EZ Series Wall Adaptor Attachment
PFXZCEATWM1
This attachment allows you to mount the EZ Series Unit on the wall. Please use it when holding the EZ Series in your hands.
USB Front Cable (1m)
CA5-USBEXT-01
Extension cable attaching USB (Type A) interface to front panel.
2mm Spacer for panel thickness adjustment
PFXZCCAT1
2mm (0.08 in.) spacer to adjust installation panel thickness.
Installation Nut *1
PFXZGMNT1
Nut for installation to a solid panel (10 pcs/set)
Socket Wrench *1
PFXZGMSW1
Socket Wrench to tighten and loosen the installation nut. (1 piece/set)
EZ Fingerprint Recognition Unit
Product Name
Model No.
Description
Protective Cover for EZ Fingerprint Recognition Unit
PFXZCCCVSS1
A protective cover to protect the sensing screen of EZ Fingerprint Recognition Unit (5 pcs/set)
Installation Nut for EZ Fingerprint Recognition Unit *1
PFXZCCNTSS1
Nut to install EZ Fingerprint Recognition Unit (5 pcs/set)
Note
EZ Fingerprint Recognition Unit involves fingerprint technology. In some jurisdictions, this product may be subject to notification to and/or approval by relevant local regulatory authority prior to importing this product into such jurisdictions and/or using this product in such jurisdictions. The jurisdictions which do not require such notification and/or approval as of December 1, 2012 ("Non-regulated Jurisdictions") are as follows:
Japan, Taiwan, USA, Canada, Mexico, Brazil, Australia, Singapore
In any other jurisdictions, we strongly suggest importers and users to contact the local authority and make inquiries as to notification and/or approval requirements with respect to the imports and the use of this product. Furthermore, if you intend to incorporate this product into any machine, device or application, additional regulations may apply. We also encourage importers and users in the Non-regulated Jurisdictions to confirm the latest notification and/or approval requirements with the local authority as relevant regulations may change from time to time. It is your responsibility to comply with laws that regulate this product. We will not be liable for any claims or litigation arising from the imports or the use of this product in any jurisdiction. You will indemnify us from any claims or litigation arising from the imports or the use of this product.
*1 The same multiple units of EZ Series cannot be connected when connecting to GP4000 Series, GP4000M Series and WinGP.
*2 Install from GP-Pro EX Ver. 4.0 or later. There is "EZ Tower Light Driver" under "Utility Tool".
*3 When you connect with GP4000M , please connect via self-powered USB Hub.
EZ Fingerprint Recognition Unit
Attention: Compliance with laws in operating countries
EZ Fingerprint Recognition Unit involves fingerprint technology. In some jurisdictions, this product may be subject to notification to and/or approval by relevant local regulatory authority prior to importing this product into such jurisdictions and/or using this product in such jurisdictions. The jurisdictions which do not require such notification and/or approval as of July 1, 2013 ("Non-regulated Jurisdictions") are as follows:
Japan, Korea, Taiwan, Thailand, Singapore, Australia, USA, Canada, Mexico, Brazil
In any other jurisdictions, we strongly suggest importers and users to contact the local authority and make inquiries as to notification and/or approval requirements with respect to the imports and the use of this product. Furthermore, if you intend to incorporate this product into any machine, device or application, additional regulations may apply. We also encourage importers and users in the Non-regulated Jurisdictions to confirm the latest notification and/or approval requirements with the local authority as relevant regulations may change from time to time.
It is your responsibility to comply with laws that regulate this product. We will not be liable for any claims or litigation arising from the imports or the use of this product in any jurisdiction. You will indemnify us from any claims or litigation arising from the imports or the use of this product.
General Specifications
Model
PFXZCCEUSS1
Supported Standards and Regulations
Supported Software
GP-Pro EX Ver. 3.1 or later
Functional Specifications
Memory Capacity
100 users (2 fingerprints for one user)
Error Rate
0.1% or less
Electrical Specifications
Rated Input Voltage
24 Vdc
Input Voltage Limits
20 to 30 Vdc
Voltage Drop
1ms
Power Consumption
1.6W max
In-Rush Current
2.5A max
Voltage Endurance
AC 2kV
Insulation Resistance
10MΩ or more
Environmental Specifications
Surrounding Air Temperature
0 to 50 ℃ (32 to 122 ℉)
Storage Temperature
-25 to 70 ℃ (-13 to 158 ℉)
Ambient Air and Storage Humidity
0 to 85%
Dust
IP65 front face
IP20 back
Pollution Degree
DP2
Corrosive Gasses
Free of corrosive gases
Operating Altitude
0 to 2000 m (0 to 6,561 ft.)
Vibration Resistance
1gn - 9Hz to 500 Hz
Amplitude 3mm - 5Hz to 9Hz
Electrical Fast Transient Burst
IEC61000-4-4
2kV Power Port
Electromagnetic Field
IEC61000-4-3
10 V/m
Electrostatic Discharge Immunity
IEC61000-4-2
4kV Contact Discharge
8kV Air Discharge
Shock Resistance
50gn, duration 11ms
No-load Current Consumption
50mA or less
Delays
First-up: less than 2s
Normal operating: less than 1s
External Specifications
External Dimensions
W69.3 x H54 x D78.5 mm (W2.73 x H2.13 x D3.09 in.)
Structure
NEMA #250/UL50 TYPE 12
(on the front panel when properly installed in an enclosure)
Cable Length
USB cable: 1.0 m (3.28 ft.)
Power cable: 2.0 m (6.56 ft.)
Weight
140g [0.31 lb]
Note: Design the USB cable to be 3 m or less when it is extended.
Dimensions
EZ Numpad
General Specifications
Model
PFXZCCEUKB1
Supported Standards and Regulations
Supported Software
GP-Pro EX Ver. 3.6 or later
Electrical Specifications
Power Supply
Rated Input Voltage
5 Vdc (Powered from USB bus)
Input Voltage Limits
4.75 to 5.25 Vdc
Power Consumption
0.75 W or less
Environmental Specifications
Physical Environment
Surrounding Air Operating Temperature
0 to 55 ℃ (32 to 131 ℉)
Storage Temperature
-20 to 60 ℃ (-4 to 140 ℉)
Surrounding Air and Storage Humidity
10 to 90% RH (Non-condensing, wet bulb temperature 39 ℃ [102.2 ℉] or less)
Dust
0.1 mg/m3 (10-7 oz/ft3) or less (nonconductive levels)
Pollution Degree
For use in Pollution Degree 2 environment
Corrosive Gasses
Free of corrosive gas
Operating Altitude
2,000m [6,561 ft] or lower
Mechanical Environment
Vibration Resistance
IEC/EN 61131-2 compliant
5 to 9 Hz Single amplitude 3.5 mm (0.14 in.)
9 to 150 Hz Fixed acceleration: 9.8 m/s2
X, Y, Z directions for 10 cycles (100 min.)
Concussion Resistance
IEC/EN 61131-2 compliant
(147 m/s2, X, Y, Z directions for 3 times)
Electrical Environment
Electrostatic Fast Transient Burst
IEC61000-4-4
2 kV Power Port (Display Unit)
1 kV Signal Ports
Electrostatic Discharge Immunity
IEC61000-4-2
6 kV Contact Discharge
8 kV Air Discharge
External Specifications
Connector Type
Type miniB (socket), USB 2.0 Full Speed
External Dimensions
W97.6 x H80.0 x D31.5 mm (W3.84 x H3.15 x D1.24 in.)
Structure *1
IP65 UL50E TYPE 4X (Indoor Use Only)
(on the front panel when properly installed in an enclosure)
Weight
150 g (0.33 lb) or less
*1 The front face of the unit, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification. Even though the unit’s level of resistance is equivalent to the UL50E TYPE 4X, oils that should have no effect on the unit can possibly harm the panel. This can occur in areas where either vaporized oils are present, or where low viscosity cutting oils are allowed to adhere to the panel for long periods of time. If the unit’s front face protection sheet peels off, these conditions can lead to the ingress of oil into the unit and separate protection measures are suggested.
Also, if non-approved oils are present, they may cause deformation or corrosion of the front panel’s plastic cover. Therefore, prior to installing the unit, be sure to confirm the type of conditions that will be present in the unit’s operating environment. If the installation gasket is used for a long period of time, or if the unit and its gasket are removed from the panel, the original level of protection cannot be kept. To maintain the original protection level, the periodical maintenance is essential.
Note:
A gasket with scratches or dirt could have lost much of its water resistance. The periodical maintenance is essential (e.g. once a year, or as soon as scratches or dirt become visible) for water resistance equivalent to IP65.
Dimensions
mm (in.)
A. Num Key / Function Key
Dimensions with cable
mm (in.)
B. USB (Type miniB) Interface
EZ Illuminated Switch
General Specifications
Model
PFXZCCEUSG1
Supported Standards and Regulations
Supported Software
GP-Pro EX Ver. 3.1 or later
Functional Specifications
Number of Switches
5 illuminated switches
Durability of Switches
1 million times or more for each switch
LED Colors
Red, Green, Yellow, Blue, White, Orange
Insert Label
Printable and replaceable insert labels
Electrical Specifications
Power Supply *1
Rated Input Voltage
5 Vdc (Powered from USB bus)
Input Voltage Limits
4.75 to 5.25 Vdc
Power Consumption *2
2.0 W or less
*1 When you connect with GP4000M Series, please connect via self power USB Hub.
*2 If connecting to a display unit that has a USB I/F with an output current of less than 500 mA, be sure to supply power from an external source (such as a self-powered hub) to EZ Illuminated Switch because the display unit cannot supply enough power.
Environmental Specifications
Physical Environment
Surrounding Air Operating Temperature
0 to 55 ℃ (32 to 131 ℉)
Storage Temperature
-20 to 60 ℃ (-4 to 140 ℉)
Surrounding Air and Storage Humidity
10 to 90% RH (Non-condensing, wet bulb temperature 39 ℃ [102.2 ℉] or less)
Dust
0.1 mg/m3 (10-7 oz/ft3) or less (nonconductive levels)
Pollution Degree
For use in Pollution Degree 2 environment
Corrosive Gasses
Free of corrosive gas
Operating Altitude
2,000m [6,561 ft] or lower
Mechanical Environment
Vibration Resistance
IEC/EN 61131-2 compliant
5 to 9 Hz Single amplitude 3.5 mm (0.14 in.)
9 to 150 Hz Fixed acceleration: 9.8 m/s2
X, Y, Z directions for 10 cycles (100 min.)
Concussion Resistance
IEC/EN 61131-2 compliant
(147 m/s2, X, Y, Z directions for 3 times)
Electrical Environment
Electrostatic Fast Transient Burst
IEC61000-4-4
2 kV Power Port (Display Unit)
1 kV Signal Ports
Electrostatic Discharge Immunity
IEC/EN61000-4-2
6 kV Contact Discharge
8 kV Air Discharge
External Specifications
Connector Type
USB I/F: Type B (socket), USB 2.0 Full Speed
USB Cable Length
1m (Removable)
External Dimensions
W122 x H54 x D28 mm (W4.80 x H2.13 x D1.10 in.)
Structure *3
IP65 NEMA #250 TYPE 4X/13
(on the front panel when properly installed in an enclosure)
Weight
110 g (0.24 lb) or less
*3 The front face of the unit, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification. Even though the unit's level of resistance is equivalent to these standards, oils that should have no effect on the unit can possibly harm the panel. This can occur in areas where either vaporized oils are present, or where low viscosity cutting oils are allowed to adhere to the panel for long periods of time. If the unit's front face protection sheet peels off, these conditions can lead to the ingress of oil into the unit and separate protection measures are suggested. Also, if non-approved oils are present, they may cause deformation or corrosion of the front panel's plastic cover. Therefore, prior to installing the unit, be sure to confirm the type of conditions that will be present in the unit's operating environment. If the installation gasket is used for a long period of time, or if the unit and its gasket are removed from the panel, the original level of protection cannot be kept. To maintain the original protection level, be sure to replace the installation gasket regularly.
Note:
The upper surface of the gasket should protrude approximately 2.5 mm (0.1 in.) from the groove. Check the gasket is inserted correctly before installing this unit to a panel.
A gasket with scratches or dirt could have lost much of its water resistance. It is recommended that the gasket should be changed periodically (e.g. once a year, or as soon as scratches or dirt become visible) for water resistance equivalent to IP65.
