Solartron Metrology contact gauging probes, LVDT probes or displacement sensors provide the gauge builder with the most cost effective solution for a range of dimensional precision measurement and positioning applications.
In a conventional LVDT sensor the displacement probe tip is pushed out using an internal spring. The precision bearings inside the linear displacement sensor ensure precise positioning of the gauge probe tip. Attention to detail in both design and manufacture of the displacement sensor ensures precision measurement throughout the linear displacement transducer's life.
Buy your LVDT sensor from Solartron Metrology and be sure that you are getting an LVDT sensor that is a result of 40 years continual improvement from our experienced design engineers. These gauge probes are manufactured solely in our dedicated ISO9001 accredited factory in the UK.
Solartron also offers a range of modules for third party sensors and for general instrumentation tasks. The Analogue Input Modules integrates third party transducers (e.g. temperature, force, pressure) to the Orbit® network. The Digital Input/output. Modules enables switches or control lines and the Encoder Input Module ties in rotary or line scale incremental type encoders (TLL)
For adjusting the pre-/posttravel on analogue spring push gauging transducers. Not for use on digital or pneumatic sensors.
Right Angle Adapter
For use with spring push gauging probes. Part Number: 203224
Clamping Collet
Ø9.5 mm
Ø10 mm
805048 (M4 Screw)
806788 (M3 Screw)
806460-SX (M4 Screw)
For use with all 8 mm clamping shaft sensors. The clamping collet distributes the clamping forces evenly around the shaft. Using the supplied grub screw, the probe can be loosened while holding the collet in place.
Extension Cables Analogue
Extension cables for analogue sensors with 5 pin DIN 240 ° connectors are available for LVDT and Half Bridge types.
Displacement transducer measuring ranges ±0.25, ± 0.5, ± 1, ± 1.5, ± 2,5, ± 5, ± 10 mm
