|
|
BeanDevice® Wilow® X-INC
Ultra-Low-Power WIFI Combo Sensors | Vibration, Inclination and Shock Monitoring | built-in datalogger | MQTT Protocol Communication
|
|
|
|
|
Product Reference
|
BND-WILOW-WIFI-X-INC-ACCMR-INCMR-MO
|
ACCMR -Measurement
Range:
2: ±2g measurement range
10: ±10g measurement range
|
INCMR– Measurement Range:
15B : bi-axis ±15°
30B : bi-axis ±30°
|
MO - Mounting option
BR - 90° Mounting bracket
M - Magnetic Mounting
|
Example 1: BND-WILOW-WIFI-2G-15B-BR
- ULP Wifi Combo sensors accelerometer (measurement range ±2g) and Inclinometer (measurement range ±15° Bi-axis) with 90° bracket mounting
Example 2: BND-WILOW-WIFI-10G-30B-M
- ULP Wifi Combo sensors accelerometer (measurement range ±10g) and Inclinometer (measurement range ±30° Bi-axis) with magnet mounting
Example 3: BND-WILOW-WIFI-2G-15B
- ULP Wifi Combo sensors accelerometer (measurement range ±2g) and Inclinometer (measurement range ±15° Bi-axis)
|
Accelerometer Specifications
|
Accelerometer technology
|
High precision accelerometer based on MEMS technology
|
Accelerometer measurement range
|
two versions: ±2g and ±10g
|
Sensitivity
|
±2g Version : 660 mV/g
±10g version: 200 mV/g
|
Typical non-linearity
|
±0,1% FS
|
Analog to Digital converter
|
24-bit delta-sigma with temperature compensation
Synhcronuous measurement channel
|
Sensor frequency response (-3 dB)
|
DC to 800 Hz
|
Noise spectral density
|
±2g Version : 45 µg/√Hz
±10g version: 100 µg/√Hz
|
Zero-g Offset Variation from RT over Temp
|
±2g Version : ±0.2 mg/°C
±10g version: ±0.1 mg/°C
|
Sensitivity Variation from RT over Temp
|
±2g Version : ±0.01 %/°C (XY) , ±0.02 %/°C (Z)
±10g version: ±0.01 %/°C
|
Offset Ratiometric Error
|
±2g Version : 4mg
±10g version: ±0.2% (XY) , ±0.1% (Z)
|
Sensitivity Ratiometric Error
|
±2g Version : ±1.25 % (X-Y) , ±0.2 % (Z)
±10g Version : ±1.6% (X-Y) , ±0.2 % (Z)
|
Cross Axis Sensitivity
|
0.02
|
Maximum sampling rate
|
2 kSPS per axis
|
Onboard temperature sensor
|
Range -40°C to +65°C , accuracy ±1°C
|
Inclinometer sensor specifications
|
Inclinometer Technology
|
Inclinometer based on MEMS Technology
|
Measurement resolution (Bandwidth 10 Hz)
|
0.001°
|
Noise density
|
|
Accuracy (Full scale)
|
|
Offset temperature dependency (temperature range –25°C to +85°C)
|
|
Sensitivity temperature dependency (temperature range –25°C to +85°C)
|
±0.005 %/°C with temperature compensation
±0.013 %/°C without temperature compensation
|
Long term stability (@23°C)
|
|
Analog to Digital converter
|
24-bit delta-sigma analog-to-digital with temperature compensation
Synchronous measurement channel
|
Sensor frequency Response (-3dB)
|
|
Noise spectral density
DC to 100 Hz
|
|
Shock sensor specifications
|
Shock Sensor technology
|
MEMS technology
|
Shock sensor range
|
±2g/±4g/±6g/±8g/±16g dynamically selectable from the BeanScape software
|
Sensitivity
|
±2g range: 0.06 mg/digit
±4g range: 0.12 mg/digit
±6g range: 0.06 mg/digit
±8g range: 0.12 mg/digit
±16g range: 0.12 mg/digit
|
Typical non-linearity
|
±0.15% on the FS
|
Analog to Digital converter
|
12-bits with temperature compensation
|
Sensor frequency response
(-3 dB)
|
DC to 800 Hz
|
Noise spectral density
|
|
Zero-g Offset Variation from RT over Temp
|
|
Sensitivity change Vs temperature
|
±0.01 %/°C
|
Anti-aliasing filter
|
Butterworth 2th order filter
|
Maximum sampling rate
|
1.6 kSPS per axis
|
Typical zero-g level offset accuracy
|
±40 mg
|
Remote configuration parameters
|
Data Acquisition mode
(SPS = sample per second)
|
Low Duty Cycle Data Acquisition (LDCDA) Mode: 1s to 24 hour
Alarm & Survey mode: 1s to 24 hour
Streaming mode : 100 SPS by default
Streaming with event-trigger (SET) Mode : 100 SPS by default
|
Sampling Rate (in streaming packet mode)
|
Minimum: 1 SPS
Maximum: 3 kSPS per axis
|
Alarm Threshold
|
High and Low Levels alarms
|
Power Mode
|
Sleep & Active power modes
|
|
Wireless Protocol Stack
|
IEEE 802.11 b/g/n
|
WSN Topology
|
Point-to-Point / Star / Cluster-Tree
|
Crypto Engine
|
WPA2, WPS2
|
Data rate
|
|
RF Characteristics
|
ISM 2.4GHz – 16 Channels. Antenna diversity architecture designed by BeanAir®
|
Receiver Sensitivity
|
18 dBm @ 1 DSSS
14.5 dBm @ 54 OFDM
|
Maximum Radio Range
|
200 m (L.O.S), radio range can be extended by adding wifi repeater
|
Antenna
|
Omnidirectional radome antenna with antenna diversity
Gain : 3 dBi
Waterproof IP67
|
|
Storage Capacity
|
up to 5 million data points
|
Wireless data downloading
|
3 minutes to download the full memory (average time)
|
Environmental and Mechanical
|
|
Aluminum casing
Dimensions in mm (LxWxH):35x59x65 mm without antenna & eyelet, Weight (with internal battery, w/o mounting option) : 220g
|
Shocks resistance
|
|
Operating Temperature
|
|
Norms & Radio Certifications
|
. CE Labelling Directive R&TTE (Radio) ETSI EN 300 328 (Europe)
. FCC (North America)
. ARIB STD-T66 Ver. 3.6 (Japan)
. ROHS - Directive 2002/95/EC
|
IP|NEMA Rating
|
IP67 | Nema 6
|
|
Rechargeable battery
|
High density Lithium-Ion rechargeable battery with a capacity of 780 mAh
|
Integrated battery charger
|
Integrated Lithium-ion battery charger with high precision battery monitoring
|
Current consumption @ 3.3V
|
• During data acquisition : 20 to 30 mA
• During Radio transmission :
1 DSSS - 278 mA
54 OFDM - 229 mA
• During sleep power mode : < 100 µA
|
External power supply
|
Two power supplies available:
• USB Power supply 5V
• 5VDC to 17VDC compatible with solar energy harvesting
|
|
M8 plastic cap
|
|
M8 to USB cable
|
1pcs M8-5pins to USB Cable, 2 meters length. Ref:WL-CBL-M8-USB-2M
|
Magnet for power on/power off
|
|
Wall mounting kit
|
4 pcs M5 screws+ Locknut. Ref:WL-SCMKIT
|
|
Power Supply
|
Wall plug-in, Switchmode power Supply 12V @ 1,25A with USB plug
Ref: WL-USB-5V-PWR
|
M8 cable
|
M8-5Pins Cable , cable length :
- 2 meters. Ref: WL-CBL-M8-2M
- 5 meters.Ref: WL-CBL-M8-5M
|
Calibration certificate
|
Calibration certificate linked to national and internatiional standards (DRAKKS)
(Ref: WL-CERT-CAL)
|
|
|
|
|
Product and Technology News
Ground vibration on construction site
Application Selector
Download Catalogue
|