Switch-Pro™ AX13 with Compact Level Controller


Series	LU10	LZ12	LP15	LV10	LO10
Type	Ultrasonic switch	Vibration switch	Capacitance switch	Buoyancy switch	Optic switch
Classification	Intrinsically safe	General purpose	General purpose	General purpose	General purpose
Application	Chemical or light weight oil	Wastewater	Conductive coating chemical	Water or chemical	Secondary containment
Installation	Universal	Universal	Side wall	Top wall	Universal
Function	Level switch	Level switch	Level switch	Level switch	Leak detection
Max. length	—	—	—	—	—
Supply	12-36 VDC	12-36 VDC	12-36 VDC	—	12-36 VDC
Contact	(1) SPST relay	(1) SPST relay	(1) SPST relay	(1) SPST reed	(1) SPST relay
Rating	32 VDC (0.5A max)	60 VA (1A max)	60 VA (1A max)	15 VA (0.25A max)	60 VA (1A max)
Enclosure	NEMA 6 (IP68)	NEMA 6 (IP68)	NEMA 6 (IP68)	NEMA 6 (IP68)	NEMA 6 (IP68)
Termination	Cable	Cable	Cable	Cable	Cable
Mount	3/4″ NPT (G)	3/4″ NPT (G)	3/4″ NPT (G)	3/4″ NPT (Rp)	3/4″ NPT (G)
Temperature	-40º F. (-40º C.) to 176º F. (80º C.)	-40º F. (-40º C.) to 176º F. (80º C.)	-40º F. (-40º C.) to 176º F. (80º C.)	-40º F. (-40º C.) to 176º F. (80º C.)	-40º F. (-40º C.) to 176º F. (80º C.)
Max. pressure	150 PSI (10 bar)	150 PSI (10 bar)	150 PSI (10 bar)	25 PSI (10 bar)	150 PSI (10 bar)
Material	PP / PFA	PP-Ryton	PP	PP / PVDF	PP / PFA

Application

Intended for side wall installation, the general purpose level switch package provides reliable liquid level detection with a 16A compact level controller for pump or valve control. The optional flash alarm brings attention to alarm conditions. Offered in two level sensor technologies, select the type and material based upon your application media. This liquid level switch package is widely applied in bulk storage and process tank level applications for high level control or low level control.

Ultrasonic Level Sensor
Broadly applied in chemicals and light weight oils

Vibration Level Sensor
Applied in wastewater with light coating or scaling

Features

Rugged polypropylene, Ryton® or PFA sensor for corrosive liquid applications

Fail-safe relay control of pumps or valves with 0-60 second delay

Polypropylene enclosure rated NEMA 4X with swivel base for conduit alignment

Optional strobe brings immediate attention to level alarm conditions

Invert switch changes relay state from NO to NC without rewiring

Offered in 2 sensing technologies for broad application coverage: ultrasonic & vibration

Specifications

Accuracy:	± 1mm in water
Repeatability:	± 0.5mm in water
LED indication:	Sensor, power & relay
Supply voltage:	120 / 240 VAC @ 50-60 Hz.
Consumption:	0.25A maximum
Strobe type:	-X12X: N/A -X11X: Xenon tube
Strobe flash:	-X12X: N/A -X11X: (1) per second
Contact type:	(1) SPST relay
Contact rating:	250 VAC @ 10A
Contact output:	Selectable NO / NC
Contact delay:	0-60 seconds
Process temp.:	F: -40° to 176° C: -40° to 80°
Ambient temp.:	F: -40° to 140° C: -40° to 60°
Pressure:	150 psi (10 bar) @ 25º C, derated @ 1.667 psi (0.113 bar) per ºC above 25º C
Enclosure rating:	NEMA 4X (IP65)
Enclosure mat.:	-X11X: PP, UL94VO & PC -X12X: PP, UL94VO
Conduit entrance:	1/2" NPT
Wetted material:	AZ13-11XX: Ryton® AU13-11XX: PP AU13-21XX: PFA
Process mount:	3/4" NPT (3/4" G)
Mount. gasket:	Viton®
Classification:	General purpose
Compliance:	CE