|
|
Product information page of Programmable Display TECHNOSHOT TS2000 Series
Compact and highly functional
Basic specifications
|
|
TS2060 |
TS2060i |
|
Power supply |
Rated voltage |
24VDC |
|
Permissible range of voltage |
24VDC ± 10% |
|
Permissible momentary power failure |
Within 1ms |
|
Demand (maximum rating) |
13W or less |
|
Insulation resistance |
|
Between DC external terminal and FG: 500VDC 10MΩ or more |
|
Physical environment |
Ambient temperature |
0 degC ~ +50 degC *1 |
|
Ambient humidity |
85%RH or less (without dew condensation) *1 |
|
Operation altitude |
2,000 meters or lower |
|
Atmosphere |
Not to be exposed to corrosive gas, or conductive dust |
|
Storage temperature |
-10 ~ 60 degC *1 |
|
Storage humidity |
85%RH or less (without dew condensation) *1 |
|
Overvoltage category |
Category II |
|
Contamination level |
Level 2 |
|
Mechanical operating conditions |
Resistance to oscillation |
Complies with JIS B 3502 (IEC61131-2) Vibration frequency: 5-9Hz, pulsating with:3.5mm, 9-150Hz, Acceleration: 9.8m/s2(1G),X,Y,Z: 3 directions (10 times each) |
|
Resistance to shock |
Complies with JIS B 3502 (IEC61131-2) Peak acceleration: 147m/s2(15G), X,Y,Z: 3 directions, three times each (18 times in total) |
|
Electric operating conditions |
Resistance to noise |
Noise voltage: 1,000Vp-p, pulse width: 1μs, pulse rise time: 1ns |
|
Resistance to static discharge |
Complies with IEC61000-4-2, contact: 6kV, air: 8kV |
|
Installation conditions |
Grounding |
Grounding resistance: Less than 100Ω, FG/SG separation |
|
Protection Structure |
Front panel: Complies with IP65 (when waterproof gasket is installed) Rear cover: Complies with IP20 |
|
Installation method |
Panel mounting |
|
Cooling system |
Natural air cooling |
|
Dimensions W*H*D(mm) |
182.5 x 138.8 x 45.8mm |
|
Panel cutout (mm) |
174.0(-0,+0.5) x 131.0(-0,+0.5) mm (same as V806/V606e) |
|
Case color |
|
Black |
|
Battery |
|
Coin type lithium battery, lifetime: 5 years (ambient temperature 25 degC) |
|
Material |
|
PC |
-
*1: Wet-bulb temperature should be 39°C or lower to prevent malfunction.
Performance specifications
|
|
TS2060 |
TS2060i |
|
Screen program memory （FROM） |
|
2.5MB |
10.5MB |
|
Backup memory （SRAM） |
|
128KB |
512KB |
|
Stroke fonts |
|
N/A |
Supported |
|
Display |
Display device |
TFT color |
|
Resolution |
320 x 240 |
|
Display size |
5.7" (QVGA) |
|
Colors |
65,536 colors (selection of 32K/256/128/monochrome available with software configuration.) |
|
Backlight |
LED |
|
Backlight lifetime |
50,000 hours |
|
Touch switch |
Type |
Analog resistance film |
|
Function switches |
Number of the function switches |
6 |
|
External interface |
D-Sub 9-pin *2 |
N/A |
RS-232C/ RS-422/485, Asynchronous type,Data length: 7, 8 bits, Parity: even, odd, none, Stop bit: 1, 2 bits, Baud rate: 4800, 9600,Stop bit: 1, 2 bits, Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200 bps |
|
Modular 8-pin（MJ1/MJ2） |
RS-232C/ RS-422 (4-wire) *3, RS-485 (two-wire), Asynchronous type,Data length: 7,8 bits, Parity: even, odd, none, Stop bit: 1, 2 bits, Baud rate: 4800, 9600,19200, 38400, 57600, 76800, 115200, 187500 bps *4 |
|
SD card |
N/A |
1 slot, as standard equipment (SD/SDHC card) |
|
Ethernet |
N/A |
1CH, 100Mbps/10Mbps |
|
USB |
Type mini-B(Ver.2.0) |
Type A、Type mini-B(Ver.2.0) |
|
Communication unit |
N/A |
CUR-xx supported |
|
Clock |
Backup period |
5 years (Ambient temperature 25 degC) |
|
Calendar accuracy |
W/ power supply: gap ±210 sec. per month (Ambient temperature 25 degC)W/o power supply: gap ±90 sec. per month (ambient temperature 25 degC, when battery backup is used.) |
|
Standards |
CE |
EN61000-6-2, EN61000-6-4 |
|
UL/cUL |
UL61010-1, UL61010-2-201 |
|
KC |
Compliant |
-
*2: Available only when DUR-00 is attached to TS2060i.
-
*3: Only MJ2 supports 4-wire system.
-
*4: 187500bps is available only when connected with SIEMENS MPI/PPI . MPI/PPI connection is supported only with MJ2.
|
|
|
|
|
|
Product & Technology News
Pressure and Temperature Transmitter
Download Catalogue
|
