Please read before using the printer

*The mechanisms in printers are consumables. Even within the warranty period, please note that certain cases are not covered.

* Precautions

• ・Please do not because the printing in the state that does not put the paper may cause a malfunction.
• ・Please use the always FEED switch when the paper feed. Pull the paper without the FEED switch and may cause a malfunction.
• ・Please do not drop or hit the printer.
• ・Be decomposed by yourself, be repaired, please do not absolutely.
• ・Please not wet a printer.
• ・Please do not use it to remove the panel.
• ・When you pull in reverse printing paper from the pledged opening, please do not it will be cause of failure.
• ・When the printer to is wrong ( When it is smoke or a strange sound or smell ), immediately turn off the power, make sure that the     abnormality is not continuing.

* Attention of the handling of the thermal paper:
・Thermal paper is a special paper which surface has been specially treated with chemicals and it is to be black by thermal                 chemical reaction.　　　

• ・Please save it in the dry cool and dark spece.
• ・Please do not scrape the hard thing, do not place near organic solvents.
• ・Do not touch a long time to vinyl chloride film, eraser and adhesive tape.
• ・Do not overlap the diazo and wet copy immediately after copying.
• ・Do not use chemical glue when gluing.
• ・Heat-sensitive paper by adhesive tape might be discolored. Be sure to stick the back 
      with double-sided tape or the like.
• ・When you touch by hand that in sweaty, there is that blurred the record or fingerprint.
• ・Please use the specified thermal paper.

* Installation

• ・Installation of printer please use between from the horizontal to the vertical.
• ・Use or storage in the following places, it will be cause of failure.
  ・Do not install.

　　　　・　A place with much mine dust and strong vibration.
　　　　・　The place of electromagnetic noise and occurrence of corrosive gas.
　　　　・　The place where is exposed to derect sun, or where there is a lot of moisture and oil.
　　　　・　The place where the temperature  is more than 40℃ and less than 0℃ of place.
　　　　・　The place where relative humidity is more than 80％.
　　　　・　The place where you can have sudden temperature change and consider dew condensation.