DAT 400 THEORETICAL CALIBRATION

DAT 400 CALIBRATION WITH A PROOF WEIGHT

DAT 400/ETHERNET

Weighing Instrumentation Weight Transmitters

DOWNLOADS

Datasheet

WORLD EXCLUSIVE Pavone systems, high performance and reliability
Upload and download function for programming with TESTER 1006
Connects directly to the fieldbus 10/100 Ethernet with TCP protocols, ModuBus / TCP, IP
Linearisation 10 points
Calibration executable with the transducers Certificates
Configuration and calibration from the front panel or from PC via USB

transducers Power:	5 V (max 6 350 Ohm cells)
Measuring range:	÷ -0.5 +3.5 mV / V (optional ÷ -3.9 +3.9 mV / V)
Input sensitivity:	00:02 MicroV / Division
Linearity:	<0.01% FS
Thermal drift:	<0.001% FS / ° C
Display:	6 digits, red 7-segment LED, height 14 mm
A / D converter:	24-bit
Internal resolution:	> 16,000,000 points
Viewable resolution:	60,000 displayable divisions on net weight
Divisions value (selectable):	x1, x2, x5
Set Decimal:	0.0; 0:00; 0000
Filter:	selectable 0.1 to 25 Hz
Keyboard:	4 keys tactile feedback disabilitabili
Power tool:	24 Vdc ± 15% - absorbed power 5 W
Operating temperature:	-10 / + 50 ° C (max 85% relative humidity without condensation)
Storage temperature:	-20 / + 70 ° C
Logic outputs:	2 optoisolated; MAX 24 VDC / 100 mA cad
Logic inputs:	2 optoisolated PNP at 24 VDC (external power supply)
Serial port:	USB, RS-232 with Modbus RTU or ASCII protocols
Transmission distance:	15m (RS232C)
Peak Hold function:	for dynamic measurements
Baud rate:	2400, 9600, 19200, 38400, 115200 selectable (RS232)
Regulatory Compliance:	EN61326-1, EN55011 and EN55014 EMC; EN61010-1 for Electrical Safety
Electric connections:	Terminal screw, step 5 mm
Dimensions and weight:	106 x 90 x 58 mm (L x H x P); 250 g
Communication protocols:	10/100 Ethernet with TCP protocols, ModuBus / TCP, IP