DAT 400 THEORETICAL CALIBRATION

 

DAT 400 CALIBRATION WITH A PROOF WEIGHT

 

DAT 400/DEVICENET

Weighing Instrumentation Weight Transmitters

DOWNLOADS

  • WORLD EXCLUSIVE Pavone systems, high performance and reliability
  • Upload and download function for programming with TESTER 1006
  • Also available with DEVICENET 
  • Linearisation 10 points
  • Calibration executable with the transducers Certificates
  • Configuration and calibration from the front panel or from PC via USB

TECHNICAL DAT 400 / DEVICENET

transducers Power:

5 V (max 6 350 Ohm cells)
Measuring range: ÷ -0.5 +3.5 mV / V (optional ÷ -3.9 +3.9 mV / V)
Input sensitivity: 00:02 MicroV / Division
Linearity: <0.01% FS
Thermal drift: <0.001% FS / ° C
Display: 6 digits, red 7-segment LED, height 14 mm
A / D converter: 24-bit
Internal resolution: > 16,000,000 points
Viewable resolution: 60,000 displayable divisions on net weight
Divisions value (selectable): x1, x2, x5
Set Decimal: 0.0; 0:00; 0000
Filter: selectable 0.1 to 25 Hz
Keyboard: 4 keys tactile feedback disabilitabili
Power tool: 24 Vdc ± 15% - absorbed power 5 W
Operating temperature: -10 / + 50 ° C (max 85% relative humidity without condensation)
Storage temperature: -20 / + 70 ° C
Logic outputs: 2 optoisolated; MAX 24 VDC / 100 mA cad
Logic inputs: 2 optoisolated PNP at 24 VDC (external power supply)
Serial port: USB, RS-232 with Modbus RTU or ASCII protocols
Transmission distance: 15m (RS232C)
Peak Hold function: for dynamic measurements
Baud rate: 2400, 9600, 19200, 38400, 115200 selectable (RS232)
Regulatory Compliance: EN61326-1, EN55011 and EN55014 EMC; EN61010-1 for Electrical Safety
Electric connections: Terminal screw, step 5 mm
Dimensions and weight: 106 x 90 x 58 mm (L x H x P); 250 g
Communication protocols: DEVICENET
 
 

 

Product & Technology News

Correct installation of a weighing system

Product Selector

Pavone

Application Selector

Pavone

Download Catalogue