DAT 500/ANALOG

Weighing Instrumentation Weight Transmitters

DOWNLOADS

Datasheet

Output RS232 or RS422 / RS485, MODBUS RTU or ASCII protocols
High performance and reliability
Upload and download function for programming with TESTER 1006
The connection can also occur through the external converter
Linearisation 10 points
Calibration executable with the transducers Certificates
Configuration and calibration from the front or from PC via RS232 / RS485 serial port with Inovation ™ program
(MS Windows)

transducers Power:	5 V (max 6 350 Ohm cells)
Measuring range:	from -0.5 to +3.5 mV / V (optional from -3.9 to +3.9 mV / V)
Input sensitivity:	00:02 MicroV / Division
Linearity:	<0.01% of full scale
Thermal drift:	<0.001% of full scale / ° C
Display:	6 digits, red 7-segment LED, height 14 mm
A / D converter:	24-bit
Internal resolution:	> 16,000,000 points
Viewable resolution:	60,000 displayable divisions on net weight
Divisions value (selectable):	x1, x2, x5
Set Decimal:	0.0; 0:00; 0000
Filter:	selectable from 0.1 to 25 Hz
Power tool:	24 VDC ± 15% - absorbed power 5 W
Operating temperature:	-10 ÷ + 50 ° C (max 85% relative humidity without condensation)
Storage temperature:	-20 ÷ + 70 ° C
Logic outputs:	2 optisolate; MAX 24 V DC / 100 mA each.
Logic inputs:	2 optoisolated 24V dc PNP (external power supply)
Serial port:	RS232C or RS422 / RS485 Modbus RTU or ASCII protocols
Transmission distance:	15m (RS232C), 1000m (RS422 and RS485)
Peak Hold function:	for dynamic measurements
Baud rate:	2400, 9600, 19200, 38400, 115200 Selectable
Analog output:	optoisolated 16-Bit Voltage: 0 ÷ 5 / 10V (R min10 K Ohm), Current: 0/4 ÷ 20mA (R max 300 Ohm)
Regulatory Compliance:	EN61326-1, EN55011 and EN55014 EMC; EN61010-1 for Electrical Safety
Electric connections:	Terminal screw, step 5 mm
Dimensions and weight:	96 x 48 x 120 mm (L x H x P); 250 g
BCD Output:	optional
Optional Bipolar output:	bipolar version ± 10V