DAT 500/PROFINET

Weighing Instrumentation Weight Transmitters

DOWNLOADS

RS232 output, ASCII protocol
High performance and reliability
Upload and download function for programming with TESTER 1006
The connection can also take place through the external converter
Linearization on 10 points
Executable calibration with transducers Certificates
Configuration and calibration from the front or from the PC via the RS232 serial port with Inovation ™ program (MS Windows)

Encoder supply:	5 V (max 6 350 ohm cells)
Measuring range:	-0.5 to +3.5 mV / V (optional from -3.9 to +3.9 mV / V)
input sensitivity:	00:02 microV / Division
Linearity:	<0.01% of full scale
Temperature drift:	<0.001% FS / ° C
Display:	6 digits, red 7-segment LED, height 14 mm
A / D converter:	24-bit
Internal resolution:	> 16,000,000 points
viewable resolution:	60,000 displayable divisions on the net weight
divisions value (selectable):	x1, x2, x5
settable decimal:	0.0; 0.00; 0.000
Filter:	selectable from 0.1 to 25 Hz
Power tool:	24 VDC ± 15% - Power consumption 5 W
Operating temperature:	-10 To + 50 ° C (max 85% humidity non-condensing)
Storage temperature:	-20 To + 70 ° C
logic outputs:	2 optisolate; MAX 24 VDC / 100 mA each.
Logic inputs:	2 opto-isolated 24V dc PNP (external power supply)
Serial port:	RS232C with ASCII or Modbus RTU protocols
Transmission distance:	15m (RS232C)
fieldbus protocol:	PROFINET
Peak Hold function:	for dynamic measurements
Baud rate:	2400, 9600, 19200, 38400, 115200 Selectable
Regulatory Compliance:	EN61326-1, EN55011 and EN55014 EMC; EN61010-1 for Electrical Safety
Electric connections:	Terminal screw, step 5 mm
Dimensions and weight:	96 x 48 x 120 mm (W x H x D); 250 g