DAT 500/DEVICENET

Weighing Instrumentation Weight Transmitters

DOWNLOADS

  • RS232 output, ASCII protocol 
  • High performance and reliability
  • Upload and download function for programming with TESTER 1006
  • Connects directly to the DEVICENET Fieldbus option card inside
  • The connection can also occur through the external converter
  • Linearisation 10 points
  • Calibration executable with the transducers Certificates
  • Configuration and calibration from the front or from the PC via the RS232 serial port with Inovation ™ program
  • (MS Windows)

TECHNICAL DAT 500 / DEVICENET

transducers Power:

5 V (max 6 350 Ohm cells)
Measuring range: from -0.5 to +3.5 mV / V (optional from -3.9 to +3.9 mV / V)
Input sensitivity: 00:02 MicroV / Division
Linearity: <0.01% of full scale
Thermal drift: <0.001% of full scale / ° C
Display: 6 digits, red 7-segment LED, height 14 mm
A / D converter: 24-bit
Internal resolution: > 16,000,000 points
Viewable resolution: 60,000 displayable divisions on net weight
Divisions value (selectable): x1, x2, x5
Set Decimal: 0.0; 0:00; 0000
Filter: selectable from 0.1 to 25 Hz
Power tool: 24 VDC ± 15% - absorbed power 5 W
Operating temperature: -10 ÷ + 50 ° C (max 85% relative humidity without condensation)
Storage temperature: -20 ÷ + 70 ° C
Logic outputs: 2 optisolate; MAX 24 V DC / 100 mA each.
Logic inputs: 2 optoisolated 24V dc PNP (external power supply)
Serial port: RS-232 with Modbus RTU or ASCII protocols
Transmission distance: 15m (RS232C)
fieldbus protocol: DEVICENET
Peak Hold function: for dynamic measurements
Baud rate: 2400, 9600, 19200, 38400, 115200 Selectable
Regulatory Compliance: EN61326-1, EN55011 and EN55014 EMC; EN61010-1 for Electrical Safety
Electric connections: Terminal screw, step 5 mm
Dimensions and weight: 96 x 48 x 120 mm (L x H x P); 250 g
 
 

 

Product & Technology News

Correct installation of a weighing system

Product Selector

Pavone

Application Selector

Pavone

Download Catalogue