I-Box 2000

Weighing Instrumentation Weight Transmitters

DOWNLOADS

Datasheet

For weighing systems based on strain gauge load cells
It allows the continuous control of the individual load cells
The effective economic alternative to digital load cells
It replaces the analog trunk cards
It simplifies installation and accelerates the calibration of the system
It provides weight and the output signal of each individual cell to correct weight distributions on the load cells
A dedicated for PC software allows you to program the operating parameters, monitors each channel and displays the weight values

transducers Power:	5 V (max 6 350 Ohm cells)
Measuring range:	from -0.5 to +3.5 mV / V (optional from -3.9 to +3.9 mV / V)
Input sensitivity:	00:03 MicroV / Division
Linearity:	<0.01% of full scale
Thermal drift:	<0.0003% of full scale / ° C
A / D converter:	24-bit
Internal resolution:	> 16,000,000 points
N ° readings per second:	0.1 ÷ 72 based on the number of active channels and digital filter
Power tool:	12 to 24 VDC or 5 VDC on request
Operating temperature:	-10 / + 50 ° C
Serial port:	COM1: RS232 (for distances up to 15m) COM2: RS485 (for distances up to 1000m)
Dimensions:	Card: 128 x 72 x 20 (L x W x H) - ABS case: 200 x 150 x 75 (L x W x H) - metal housing: 160 x 160 x 90 (L x W x H)
CE conformity:	EN 61000-6-3, EN 61000-6-2