AND LINK 3000

Weighing Instrumentation Weight Transmitters

DOWNLOADS

Datasheet

5 different electronic configurations
5 different cases for all system requirements
And remote diagnostics from field failures
Remote configuration from PC (through dedicated software) or directly from the Master via the communication protocol used
Integrated into any industrial control and supervision system
Faulty cell emulation (exclusion from the weighing system with automatic re-calibration)
Troubleshooting on the load cells via local diagnosis and remotized

Operating temperature:	-10 To + 50 ° C
Storage temperature:	-20 To +70 ° C
Power to the Board:	12 to 24 VDC
Load cell supply:	5 Vdc
input signal cells:	measurement range of -5 mV / V to + 5mV / V
A / D converter:	24 bits
Internal resolution:	> 16,000,000 points
Resolution 2 mV / V:	> 3,000,000 points on each cell channel
input sensitivity:	0003 micronV / Division
Readings per second per cell:	from 0.1 to 72 based on the number of activated cell channels and the digital filter value
Linearity:	> 12:01% FS
Temperature drift:	> 0.003% FS / ° C
Serial Ports:	COM1: RS232 (for PC configuration parameters)
	COM2: RS485 Modbus RTU protocol
	Profibus-DP
	DeviceNet
	CANOpen
	Modbus TCP over Ethernet
Electric connections:	Load Cele: removable terminal blocks 7-pin 5mm diam
	Power: 7-pin removable terminal diam 5mm
	Profibus-DP: D-sub 9-pin connector
	DeviceNet: 5-pin removable terminal blocks
	CANOpen: D-sub 9-pin connector
	Ethernet: RJ-45 connector
dimensions:	130x100x60 mm (WxHxD) of carrier board for DIN rail
CE conformity:	EN 61000-6-3, EN 61000-6-2