Product Reference
BND-AN-MV-XTD-N CH

N- Number of data acquisition channels : 
- 4 : 4 Channels
Example : BND-AN-MV-XTD-4CH : BeanDevice® AN-mV Xtenderwith four channels

Analog data acquisition block specifications
Signal Conditionning Analog low voltage mV with voltage-compensated measurement
Number of channels 4 Channels
A/D Converter 16 bits - SAR Architecture (Successive Approximation Register) with temperature compensation
Measurement range ±20 mV (bipolar) or 0-40 mV (unipolar)
Non-linearity error ± 0,5 LSB
Measurement accuracy < 0,2% when plugged on external power supply 
< 0,4% when operating on battery
Sensor Connector M12-5Pins coming with an IP rating IP67

Sensor wiring code (M12 Socket)
Caption Pwr+ : sensor power supply (4.5 to 20 Volts)
Gnd : electrical ground
Sens+ : sensor signal + input
Sens- : Not used 

Sensor Power Supply specifications
Excitation voltage range 4.5 Volts to 20Volts , configurable from the BeanScape® software
Excitation voltage accuracy on full scale range(@25°C) ±0.1%
Maximum Output Power (@25°C) 2 Watts


Over-the-air configuration (OTAC) parameters
Data Acquisition mode Low Duty Cycle Data Acquisition (LDCDA) Mode: 1s to 24 hour 
Alarm & Survey mode: 1s to 24 hour
Alarm Threshold 2 high levels alarms & 2 low levels alarms
Sensor power supply 4.5 to 20 Volts
Analog Input polarity Bipolar or Unipolar
Power Mode Sleeping, Sleeping with Network Listening & Active
TX Power -7 dBm / -1 dBm / 5 dBm / 11 dBm / 15 dBm / 18 dBm

RF Specifications
Wireless Protocol Stack IEEE 802.15.4 (2006 version)
WSN Topology Point-to-Point / Star
Data rate 250 Kbits/s
RF Characteristics ISM 2.4GHz – 16 Channels
TX Power +0 dBm to +18 dBm
Receiver Sensitivity -95,5 dBm to -104 dBm
Maximum Radio Range 1 Km (L.O.S)
Antenna diversity 2 omnidirectional N-Type antenna , gain of 2.2 dBi , IP67

Embedded Data logger
Storage capacity up to 1 million data points
Wireless data downloading 3 minutes to download the full memory (average time)

Environmental and Mechanical
Enclosure Aluminium, Watertight IP65 – Fire Protection : ULV94/Getex 
Enclosure dimensions (w/o antenna ) L x l x h : 149.1mm x 77mm x 60.5mm
Weight : 690g
Shocks resistance 10g during 50 ms
Operating Temperature -40 °C to +85 °C
Norms CE Labelling Directive R&TTE (Radio) ETSI EN 300 328
ROHS - Directive 2002/95/EC

Power supply
Primary cell protection Integrated Lithium-ion battery charger with high precision battery monitoring :
  • Overvoltage Protection, Overcurrent/Short-Circuit Protection, Undervoltage Protection
  • Battery Temperature monitioring
  • Current accumulation measurement
Current consumption @3.3V
  • During data acquisition : 70mA to 130mA (depends on external sensor power supply)
  • During Radio transmission : 60 mA @ 0dBm
  • During sleeping: < 30 µA
Primary cell External power supply : +8v to +28v
Rechargeable battery Lithium-Ion high density rechargeable battery capacity of 950 mAh

Option(s)
Calibration certificate Calibration certificate linked to national and international standards (COFRAC)
 
 

 

Product and Technology News

Pressure and Temperature Transmitter

Download Catalogue