|
|
 |
|
|
Specifications of PFXGM4B01D
Display Specifications
|
Virtual Resolution (pixels) |
320 x 240 (QVGA) |
|
Language Fonts |
Japanese: 6,962 (JIS Standards 1 & 2) (including 607 non-kanji characters),
ANK: 158 (Korean, Traditional Chinese and Simplified Chinese fonts are downloadable. |
|
Character sizes |
Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts,
Stroke font: 6 to 127 pixel fonts,
Image font: 8 to 72 pixel fonts |
|
Font sizes |
Standard font: Width can be expanded up to 8 times.
Height can be expanded up to 8 times. *1 |
|
8 x 8 pixels |
40 characters per row x 30 rows |
|
8 x 16 pixels |
40 characters per row x 15 rows |
|
16 x 16 pixels |
20 characters per row x 15 rows |
|
32 x 32 pixels |
10 characters per row x 7 rows |
|
Application memory |
FLASH EPROM 8 MB *2 |
|
Logic Program Area |
FLASH EPROM 132 KB *3
(Equivalent to 15,000 steps) |
|
Font Area |
FLASH EPROM 8 MB
(when limit exceeded, uses application memory) |
|
Data backup |
nvSRAM 128 KB *4 |
|
Clock Accuracy |
Uses the clock of an external device *5 |
|
Touch Panel Type |
Resistive Film (analog) |
|
Touch Panel Service Lifetime |
1,000,000 times or more |
|
Interface |
Serial (COM1) |
Asynchronous Transmission: RS-232C/422/485,
Data Length: 7 or 8 bit, Stop Bit: 1 or 2 bit,
Parity: none, Odd or Even,
Data Transmission Speed: 2,400 to 115,200bps, 187,500 bps,
Connector: D-Sub9 (plug) |
|
Ethernet (LAN) |
IEEE802.3i/ IEEE802.3u, 10BASE-T/100BASE-TX,
Connector: Modular jack (RJ-45) x 1 |
|
USB (Type A) |
USB2.0, Connector: Type A x 1,
Power Supply Voltage: DC5V±5％,
Maximum Transmission Distance: 3m (9.84 ft.) or less |
|
USB (mini-B) |
USB2.0, Connector: mini-B x 1,
Maximum Transmission Distance: 5m (16.40 ft.) or less |
-
*1 Other font sizes can be set up with the Editor software.
-
*2 Capacity available for user application. The capacity depends on how many fonts you load from Editor software.
-
*3 Up to 60,000 steps can be converted in software. However, this reduces application memory capacity (for screen data) by 1MB.
-
*4 Application memory can provide 128KB for Data Backup.
-
*5 Set up the "Clock Updates" feature with the Editor software.
General Specifications
Supported Standards
and Regulations |
      |
|
Rated Input Voltage |
24Vdc |
|
Input Voltage Limits |
20.4 to 28.8Vdc |
|
Acceptable Voltage Drop |
7ms or less |
|
Power Consumption |
1.6W or less |
|
In-Rush Current |
30A or less |
|
Voltage Endurance |
1,000 Vac 20 mA for 1 min (between charging and FG terminals) |
|
Insulation Resistance |
500 Vdc, 10 MΩ or more (between charging and FG terminals) |
Environmental Specifications
|
Surrounding Air Temperature |
0 to 50 ℃ (32 to 122 ℉) |
|
Storage Temperature |
-20 to 60 ℃ (-4 to 140 ℉) |
|
Ambient Humidity |
85 % RH (Wet bulb temperature: 39 ℃ (102.2 ℉)
or less - no condensation.) |
|
Storage Humidity |
85 % RH (Wet bulb temperature: 39 ℃ (102.2 ℉)
or less - no condensation.) |
|
Dust |
0.1 mg/m3 (10-7 oz/ft3) (non-conductive levels) |
|
Pollution Degree |
For use in Pollution Degree 2 environment |
|
Atmosphere |
Free of corrosive gases |
|
Air Pressure (altitude range) |
800 to 1,114 hPa (2,000 m (6,561 ft) or lower) |
|
Vibration Resistance |
EN61131-2 compliant
5 to 9 Hz Single amplitude: 3.5 mm (0.14 in.) |
|
Shock Resistance |
IEC/EN 61131-2 compliant
147 m/s2, X, Y, Z 3directions |
Electrical fast
transient/burst |
IEC61000-4-4
2kV Power port
1kV Signal ports |
|
Electrostatic Discharge Immunity |
IEC61000-4-2
6kV direct contact
8kV air contact |
Structural Specifications
|
Structure |
IP20 (NEMA Type 4X not supported) |
|
Cooling Method |
Natural air circulation |
|
Weight |
0.21kg (0.46 lb.) or less |
|
Grounding |
Functional grounding: Grounding resistance of 100Ω, 2mm2 (AWG 14)
or thicker wire, or your country's applicable standard. |
External Dimensions
DIN Rail Attached Demention
|
|
|
|
|
|
|
