White LED (Not user replaceable. When replacement is required, contact your local distributor.)
Brightness Control
16 Levels (Adjusted with touch panel)
Contrast Control
Not Applicable
Language Fonts
Japanese: 6,962 (JIS Standards 1 & 2) (including 607 non-kanji characters), ANK: 158 (Korean, Traditional Chinese, Simplified Chinese, Thai and Cyrillic can be added from the font setting of the screen editor.)
Character Sizes
Standard Font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 Pixel Fonts, Stroke Font: 6 to 127 Pixel Fonts
Font Sizes
Standard font: Width can be expanded up to 8 times., Height can be expanded up to 8 times. *1
8 x 8 Dots
80 Char. x 60 Rows
8 x 16 Dots
80 Char. x 30 Rows
16 x 16 Dots
40 Char. x 30 Rows
32 x 32 Dots
20 Char. x 15 Rows
Application Memory
When usin GP-Pro EX:
Media: FLASH EPROM
Screen Area *2: 32MB *3
User Font Area: 8MB
Logic Program Area: 132KB (Equivalent to 15,000 steps)
Free Space: None
Removable System: No
Backup Memory
When using GP-Pro EX:
Screen Area: SRAM 320KB *3
Variable Area: SRAM 64KB
Battery: Rechargeable battery / Primary battery for clock data backup
Clock Accuracy
±65 sec./month (deviation at room temperature and power is OFF) *4
Touch Panel Type
Resistive Film (Analog)
Touch Panel Resolution
1,024 x 1,024
Touch Panel Service Life
1 million times or more
Interface
Serial (COM1)
Asynchronous Transmission:RS-232C/RS-422/RS-485, Data Length: 7 or 8 bits
Stop Bit: 1 or 2 bits
Parity: None, odd, or even, Data transmission speed: 2,400 to 115,200bps, 187,500bps (MPI)
Maximum Communication Distance *5:
When using RS-232C: 15m (49.2ft)
When using RS-422 at 115,200bps : 1,200m (3937ft)
Ethernet (LAN)
IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX Connector: Modular Jack (RJ-45) x 1
Maximum Communication Distance *5: 100m (328.1ft)
USB (Type-A)
Conforms to USB2.0 (TYPE-A) x 1, Power Supply Voltage: DC 5 V ±5 %, Output Current: 500mA or less, Communication Distance: 5m [16.4ft.] or less
USB (Type mini-B)
Conforms to USB2.0 (mini-B) x 1, Communication Distance: 5m [16.4ft.] or less
GP Rear Panel Switch, 2 Contacts (A-contact), Rated Voltage: DC 30V, Maximum Rated Current: 700mA (Minimum Allowable Load: DC 3V, 5mA), Applicable Standards *6: IEC/EN60947-5-8, 60204-1, UL508, CSA C22.2 No.14, ISO12100/EN12100-1,2, ISO11161/prEN11161, ISO10218/EN775, ANSI/RIA R15.06, ANSI B11.19
Key Switch Output
1c-Contact, Rated Voltage: DC 24V, Maximum Rated Current: 300mA
External *7
Operation Output
Open Collector Output: 1 Point, Rated Voltage: DC 24V, Maximum Rated Current: 300mA
External Buzzer Output
Open Collector Output 1 Point, Rated Voltage: DC 24V, Maximum Rated Current: 300mA
DOUT Output
Open Collector Output: 2 Points [F1, F2], Rated Voltage: DC 24V, Maximum Rated Current: 300mA/point
General Specification
GP-4311HT
International Safety Standards
Rated Input Voltage
24Vdc
Input Voltage Limits
DC 19.2 to 28.8Vdc
Allowable Voltage Drop
10ms or less
Power Consumption
12W or less (When power is not supplied to external devices: 8W or less)
In-Rush Current
35A or less
Voltage Endurance
500Vac, 20mA for 1 minute (between charging and FG terminals)
Insulation Resistance
500Vdc, 10MΩ or more (between charging and FG terminals)
Surrounding Air Temperature
0 to 40°C (32 to 104°F)
Storage Temperature
-20 to 60°C (-4 to 140°F)
Ambient Humidity
10% to 90% RH (Non Condensing, Wet Bulb Temperature 39°C [102.2°F] or less)
Storage Humidity
10 to 90% RH (Wet Bulb Temperature: 39°C max. - No condensation.)
Dust
0.1 mg/m3 (10-7 oz/ft3) or less (Non-conductive Levels)
Pollution Degree
For use in pollution degree 2 environment
Atmosphere
Free of corrosive gases
Air Pressure (Altitude Range)
800 to 1,114hPa (2,000m [6,561ft] or lower)
Vibration Resistance
IEC/EN 61131-2 compliant 5 to 9Hz Single amplitude 3.5mm (0.14 in.)
9 to 150Hz Fixed acceleration: 9.8m/s2
X, Y, Z directions for 10 cycles (Approximately 100 Minutes)
Shock Resistance
IEC/EN 61131-2 compliant 147m/s2, X, Y, Z directions for 3 times
Functional Grounding: Grounding resistance of 100Ω, 2mm2 (AWG 14) or thicker wire, or your country's applicable standard (same for FG and SG terminals).
Structure *8
IP65F
Weight Approx.
910g (2.01lb) or less: without a key switch, unit only
960g (2.12lb) or less: with a key switch, unit only
*1Other font sizes can be set up with the Editor software.
*2Use the screen area when the user font area's capacity is exceeded - for example, when an image font or a picture font is used.
*3Amount of memory you can use differs depending on your screen editing software.
*4Depending on the operating temperature and age of unit, the clock can deviate from -380 to +90 sec./month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.
*5When using the Conversion Adapter (model number: AGP3000H-ADPCOM-01), the distance includes the cable length between this product and the Conversion Adapter.
*6Overall system may not meet these standards if implemented outside these parameters. Follow these standards when designing the system.
*7The conversion adapter is required to use the external output interface (DOUT) and build a system.adapter.
*8This product has been tested using conditions equivalent to the standards shown in the specification.
Parts Identification
GP4000H unit
[Front]
(A) Emergency stop switch / Stop switch (B) Status LED (POWER) (C) Operation LED (O.P.) (D) Operation switch (E) Function switches
[Top]
(F) Maintenance cover (G) Key switch (H) USB (Type A) interface (I) SD card slot (J) USB (mini-B) interface
[Right and Rear]
(K) 3-position enable switch (L) Neck strap attachment slot (M) Hanger (N) SD card access LED (O) Touch pen (P) Wall hanging adapter attachment slots (Q) Hand strap attachment slots (R) Insertion hole (with cover) for function switch sheet (S) Interface for direct-connect cable (with connector cover)
Conversion Adapter
[Bottom]
(T) Ethernet Interface (U) Connector Cover (V) Serial Interface
Product & Technology News
PS6000 makes the next stage of your digital transformation
