PFXSTW6600WAD

Standard product information

Family

Web HMI

Series

STW6000 Series

Size

12" Wide

Model

PFXSTW6600WAD

Global Code

PFXSTW6600WAD

Sales Status

Sale

Repair Status

✔ (Maintenance service is available, able to be maintained.)

Display specifications

Display type

TFT Color LCD

Display size

12.1" Wide

Resolution

1,280 x 800 pixels (WXGA)

Effective display area

W261.12 x H163.2 mm [W10.28 x H6.43 in.]

Display colors

16 million colors*1

Backlight

White LED (Not user replaceable. When replacement is required, contact your local distributor.)

Backlight service life

50,000 hrs. or more (each in continuous operation at 25 °C [77 °F] before backlight brightness decreases to 25%)

Brightness control

16 Levels (Adjusted with touch panel)

Touch panel type

Resistive Film (analog, single-touch)

Touch panel resolution

1,024 x 1,024

Touch panel lifetime

1,000,000 times or more

1For details about Display colors, refer to the manual for your screen editing software.

Electrical specifications

Rated input voltage

24 Vdc

Input voltage limits

19.2 to 28.8 Vdc

Allowable voltage drop

10 ms or less

Power consumption

Max. 18.4 W
When power is not supplied to external devices: 15 W or less
When screen turns off the backlight (standby mode): 5.9 W or less

In-rush current

30 A or less

Voltage endurance

1,000 Vac, 20 mA for 1 minute (between power terminal and FG terminals)

Insulation resistance

500 Vdc, 10 MΩ or more (between power terminal and FG terminals)

Environmental specifications

International safety standards

Surrounding air temperature

0 to 50 °C [32 to 122 °F]

Storage temperature

-20 to +60 °C [-4 to 140 °F]

Dust

0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)

Pollution degree

For use in Pollution Degree 2 environment

Corrosive gases

Free of corrosive gases

Air pressure (altitude range)

800 to 1,114 hPa (2,000 m [6,561 ft.] above sea level or less)

Vibration resistance

IEC/EN 61131-2 compliant
5 to 9 Hz single amplitude 3.5 mm [0.14 in.]
9 to 150 Hz fixed acceleration: 9.8 m/s2
X, Y, Z directions for 10 cycles (approx. 100 min.)

Concussion resistance

IEC/EN 61131-2 compliant 147 m/s2, X, Y, Z directions for 3 times

Electrical fast transient/burst

IEC 61000-4-4
2 kV: Power port (display unit)
1 kV: Signal ports

Electrostatic discharge immunity

Contact Discharge Method: 6 kV
Air Discharge Method: 8 kV
(IEC/EN61000-4-2 Level 3)

Interface specifications

USB (Type A)

Conforms to USB 2.0 (Type A) x 1
Power supply voltage: 5 Vdc ±5 %
Output Current: 500 mA or less
Communication distance: 5 m [16.4 ft.] or less

USB (micro-B)

--The USB (micro-B) interface is disabled.

Ethernet

IEEE802.3i / IEEE802.3u, 10BASE-T / 100BASE-TX, Connector: Modular jack (RJ-45) x 2*2

2ETH1 and ETH2 have the same IP address and MAC address.

Structural specifications

Grounding

Functional grounding: Grounding resistance of 100 Ω, 2mm2 (AWG 14) or thicker wire, or your country's applicable standard. (Same for FG and SG terminals)

Cooling method

Natural air circulation

Structure

IP65F, Type 1, Type 4X (indoor use only), Type 13 (on the front panel when properly installed in an enclosure)*3

External dimensions

W313 x H235 x D50 mm [W12.32 x H9.25 x D1.97 in.]

Panel cut-out dimensions

W295 x H217 mm [W11.61 x H8.54 in.]
Panel thickness area: 1.6 to 5 mm [0.06 to 0.2 in.]*4

Weight

1.8 kg [3.97 lb] or less

3For dimensional tolerance, everything +1/-0 mm (+0.04/-0 in) and R in angle are below R3 (R0.12 in)

4For dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.]. Even if the installation wall thickness is within the recommended range for the "Panel Cut Dimensions", depending on wall's material, size, and installation location of GP unit and other devices, the installation wall could warp. To prevent warping, the installation surface may need to be strengthened.

Dimensions

External dimensions