PFXGP4G01DNWLS

Standard product information

Family

Hardware

Series

Data Collection Devices

Model

PFXGP4G01DNWLS

Sales Status

Sale

Repair Status

✔ (Maintenance service is available, able to be maintained.)

Specification

Electrical Specifications

Model#		PFXGP4G01DNWLS
Rated input voltage		24Vdc
Input voltage limits		19.2 to 28.8Vdc
Voltage drop		5ms or less
Power consumption	Maximum power consumption	11W or less
Power consumption	When power is not supplied to external devices	7W or less
In-rush current		30A or less
Voltage endurance		1,000 Vac, 20 mA for 1 minute (between charging and FG terminals)
Insulation resistance		500 Vdc, 10 MΩ or more (between charging and FG terminals)

Environmental Specifications

Model#	PFXGP4G01DNWLS
Surrounding air temperature	0 to 60°C (32 to 140 °F)
Storage temperature	-20 to 60°C (-4 to 140 °F)
Surrounding air and storage humidity	10% to 90% RH (Non condensing, wet bulb temperature 39 °C [102.2 °F] or less)
Dust	0.1mg/m3 (10-7 oz/ft3) or less (non-conductive levels)
Pollution degree	Pollution degree 2
Corrosive gases	Free of corrosive gases
Atmospheric pressure (operating altitude)	800 to 1,114 hPa (2,000 m [6,561 ft] or lower)
Vibration resistance	IEC/EN 61131-2 compliant 5 to 9 Hz Single amplitude 3.5 mm (0.14 in) 9 to 150 Hz Fixed acceleration: 9.8 m/s2 X, Y, Z directions for 10 cycles (approximately 100 minutes)
Shock resistance	IEC/EN 61131-2 compliant 147 m/s2, X, Y, Z directions for 3 times
Noise immunity	Noise voltage: 1,000 Vp-p Pulse duration: 1 μs Rise time: 1 ns (via noise simulator)
Electrostatic discharge immunity	Contact discharge method: 6k V Air discharge method: 8 kV (IEC/EN 61000-4-2 Level 3)

Memory

Model#	PFXGP4G01DNWLS
Application Memory	Editor - GP-Pro EX: Media: FLASH EPROM Screen Area 1: 32MB User Font Area: 8MB Logic Program Area: 132KB (Equivalent to 15,000 steps） Free Space: None Removable System:* No
Backup Memory	Editor - GP-Pro EX: Screen Area: SRAM 320KB Variable Area: SRAM 64KB Battery: Replaceable battery / Primary battery for clock data backup

*1Use the screen area when the user font area's capacity is exceeded - for example, when an image font or a picture font is used.

Interface Specifiations

Model#	PFXGP4G01DNWLS
Serial interface (PLC/COM1)	Asynchronous transmission: RS-232C/422/485 Data length: 7 or 8 bits Stop bit: 1 or 2 bits Parity: None, odd, or even Data Transmission Speed: 2,400 to 115,200 bps Maximum transmission distance: With RS-232: 15 m (49.2 ft), With RS-422 at 115,200 bps: 1,200 m (3,937 ft)
Serial interface (HMI)	Asynchronous transmission: RS-232C/422/485 Data length: 7 or 8 bits Stop bit: 1 or 2 bits Parity: None, odd, or even Data Transmission Speed: 2,400 to 115,200 bps Maximum transmission distance: With RS-232: 15 m (49.2 ft), With RS-422 at 115,200 bps: 1,200 m (3,937 ft)
USB (Type A) interface	Connector: USB2.0 (Type A) x 1 Power supply voltage: 5 Vdc ±5 % Maximum current supplied: 500 mA/port Maximum transmission distance: Less than 5 m (16.4 ft)
USB (mini B) interface	Connector: USB2.0 (mini B) x 1 Maximum transmission distance: Less than 5 m (16.4 ft)
Ethernet interface	Connector: Modular jack (RJ-45) x 1 Standard: IEEE802.3u, 10BASE-T/100BASE-TX Maximum transmission distance: 100 m (328.1 ft)
SD Card	SD Card Slot x 1 SD/SDHC card of up to 32 GB

Structural Specifications

Model#	PFXGP4G01DNWLS
Grounding	Functional grounding: Grounding resistance of 100 Ω, 2 mm2 (AWG 14) or thicker wire, or your country's applicable standard (same for FG and SG terminals).
Cooling method	Natural air circulation
Structure	Rating *2: Equivalent to IP20 Installation configuration: 35 mm (1.38 in) DIN rail or panel mounted (IEC 60715 compliant)
External dimensions	W46 x H162 x D126 mm (W1.81 x H6.38 x D4.96 in.)
Weight	700 g (1.54 lb) or less

*2Although compliance has been confirmed under the previously mentioned test conditions, usage is not guaranteed for all environments. Be sure to check the conditions of the environment before use.