PFXGM4B01D

Standard product information

Family

HMI

Series

GP4000M Series

Size

None Display

Model

PFXGM4B01D

Global Code

PFXGM4B01D

Product Features

Rear Module

Repair Status

- (Maintenance service is not available. Replace with a new unit under warranty.)

Display Specifications

Virtual Resolution (pixels)		320 x 240 (QVGA)
Language Fonts *1		Japanese: 6,962 (JIS Standards 1 & 2) (including 607 non-kanji characters), ANK: 158 (Korean, Traditional Chinese and Simplified Chinese fonts are downloadable.
Character sizes		Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts, Stroke font: 6 to 127 pixel fonts, Image font: 8 to 72 pixel fonts
Font sizes		Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times. *2
8 x 8 pixels		40 characters per row x 30 rows
8 x 16 pixels		40 characters per row x 15 rows
16 x 16 pixels		20 characters per row x 15 rows
32 x 32 pixels		10 characters per row x 7 rows
Application memory		FLASH EPROM 8 MB *3
Logic Program Area		FLASH EPROM 132 KB *4 (Equivalent to 15,000 steps)
Font Area		FLASH EPROM 8 MB (when limit exceeded, uses application memory)
Data backup		nvSRAM 128 KB *5
Clock Accuracy		Uses the clock of an external device *6
Touch Panel Type		Resistive Film (analog)
Touch Panel Service Lifetime		1,000,000 times or more
Interface	Serial (COM1)	Asynchronous Transmission: RS-232C/422/485, Data Length: 7 or 8 bit, Stop Bit: 1 or 2 bit, Parity: none, Odd or Even, Data Transmission Speed: 2,400 to 115,200bps, 187,500 bps, Connector: D-Sub9 (plug)
	Ethernet (LAN)	IEEE802.3i/ IEEE802.3u, 10BASE-T/100BASE-TX, Connector: Modular jack (RJ-45) x 1
	USB (Type A)	USB2.0, Connector: Type A x 1, Power Supply Voltage: DC5V±5％, Maximum Transmission Distance: 3m (9.84 ft.) or less
	USB (mini-B)	USB2.0, Connector: mini-B x 1, Maximum Transmission Distance: 5m (16.40 ft.) or less

*1 Please refer to the GP-Pro EX Reference Manual(link is external) for details on font types and character codes.
*2 Other font sizes can be set up with the Editor software.
*3 Capacity available for user application. The capacity depends on how many fonts you load from Editor software.
*4 Up to 60,000 steps can be converted in software. However, this reduces application memory capacity (for screen data) by 1MB.
*5 Application memory can provide 128KB for Data Backup. .
*6 Set up the "Clock Updates" feature with the Editor software.

General Specifications

Supported Standards and Regulations
Rated Input Voltage	24Vdc
Input Voltage Limits	20.4 to 28.8Vdc
Acceptable Voltage Drop	7ms or less
Power Consumption	5.2W or less
In-Rush Current	30A or less
Voltage Endurance	1,000 Vac 20 mA for 1 min (between charging and FG terminals)
Insulation Resistance	500 Vdc, 10 MΩ or more (between charging and FG terminals)

Environmental Specifications

Surrounding Air Temperature	0 to 50 ℃ (32 to 122 ℉)
Storage Temperature	-20 to 60 ℃ (-4 to 140 ℉)
Ambient Humidity	85 % RH (Wet bulb temperature: 39 ℃ (102.2 ℉) or less - no condensation.)
Storage Humidity	85 % RH (Wet bulb temperature: 39 ℃ (102.2 ℉) or less - no condensation.)
Dust	0.1 mg/m3 (10-7 oz/ft3) (non-conductive levels)
Pollution Degree	For use in Pollution Degree 2 environment
Atmosphere	Free of corrosive gases
Air Pressure (altitude range)	800 to 1,114 hPa (2,000 m (6,561 ft) or lower)
Vibration Resistance	EN61131-2 compliant 5 to 9 Hz Single amplitude: 3.5 mm (0.14 in.)
Shock Resistance	IEC/EN 61131-2 compliant 147 m/s2, X, Y, Z 3directions
Electrical fast transient/burst	IEC61000-4-4 2kV Power port 1kV Signal ports
Electrostatic Discharge Immunity	IEC61000-4-2 6kV direct contact 8kV air contact

Structural Specifications

Structure	IP20 (NEMA Type 4X not supported)
Cooling Method	Natural air circulation
Weight	0.21kg (0.46 lb.) or less
Grounding	Functional grounding: Grounding resistance of 100Ω, 2mm2 (AWG 14) or thicker wire, or your country's applicable standard.