PFXGP4115T2D

Standard product information

Family

HMI

Series

GP4100 Series

Size

4.3"

Model

PFXGP4115T2D

Global Code

PFXGP4115T2D

Product Features

4.3" Wide DC RS-232C Color

Repair Status

- (Maintenance service is not available. Replace with a new unit.)

Display specifications

Display type

TFT Color LCD

Display size

4.3" Wide

Resolution

480 x 272 pixels

Effective display area

W95 x H53.9 mm [W3.74 x H2.12 in.]

Display colors

65,536 colors

Backlight

White LED (Not user replaceable. When replacement is required, contact your local distributor.)

Backlight service life

50,000 hrs. or more (each in continuous operation at 25 °C [77 °F] before backlight brightness decreases to 50%)

Brightness control

16 Levels (Adjusted with touch panel)

Electrical specifications

Rated input voltage

12 to 24 Vdc

Input voltage limits

10.2 to 28.8 Vdc

Allowable voltage drop

1 ms or less with lowest input voltage, 10 ms or less with rated input voltage

Power consumption

Max. 7.5 W
When power is not supplied to external devices: 3.4 W or less

In-rush current

12 Vdc: 20 A or less, 24 Vdc: 40 A or less

Voltage endurance

1,000 Vac, 20 mA for 1 minute (between power terminal and FG terminals)

Insulation resistance

500 Vdc, 10 MΩ or more (between power terminal and FG terminals)

Environmental specifications

International safety standards

Surrounding air temperature

0 to 50 °C [32 to 122 °F]

Storage temperature

-20 to +60 °C [-4 to 140 °F]

Ambient humidity

10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. - no condensation)

Storage humidity

10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. - no condensation)

Dust

0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)

Pollution degree

For use in Pollution Degree 2 environment

Corrosive gases

Free of corrosive gases

Air pressure (altitude range)

800 to 1,114 hPa (2,000 m [6,561 ft.] above sea level or less)

Vibration resistance

IEC/EN 61131-2 compliant
5 to 9 Hz single amplitude 3.5 mm [0.14 in.]
9 to 150 Hz fixed acceleration: 9.8 m/s2
X, Y, Z directions for 10 cycles (approx. 100 min.)

Concussion resistance

IEC/EN 61131-2 compliant 147 m/s2, X, Y, Z directions for 3 times

Electrostatic discharge immunity

Contact Discharge Method: 6 kV (IEC/EN61000-4-2 Level 3)

Memory

Application memory

When using GP-Pro EX:
- Media: FLASH EPROM
- Screen Area: 8MB *Use the screen area when the user font area's capacity is exceeded - for example, when an image font or a picture font is used.
- User Font Area: None
- Logic Program Area: 132KB (Equivalent to 15,000 steps) *Up to 60,000 steps can be converted in software. However, this reduces application memory capacity (for screen data) by 1 MB.
- Free Space: None

Removable System: No

Backup memory

When using GP-Pro EX:
- Screen Area: FLASH EPROM 128KB
- Variable Area: None

Battery: None*1

*1For details on the memory size, refer to the manual for your screen editing software.

Interface specifications

Serial (COM1)

Asynchronous Transmission: RS-232C, Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits, Parity: None, Even or Odd, Data Transmission Speed: 2,400 to 115,200 bps, Connector: 2-piece terminal block 9 pin

USB (Type A)

Conforms to USB 2.0 (Type A) x 1
Power supply voltage: 5 Vdc ±5 %
Communication distance: 3 m [9.84 ft.] or less

USB (mini-B)

Conforms to USB 2.0 (mini-B) x 1, Communication Distance: 3 m [9.84 ft] or less

Structural specifications

Grounding

Functional grounding: Grounding resistance of 100 Ω, 2 mm2 (AWG 14) or thicker wire, or your country’s applicable standard (same for FG and SG terminals).

Cooling method

Natural air circulation

Structure

IP65F, Type 1, Type 4X (indoor use only), Type 13*2

External dimensions

W124.9 x H90.4 x D38.8 mm [W4.92 x H3.56 x D1.53 in.]

Panel cut-out dimensions

W112.5 x H77.5 mm [W 4.43 x H3.05 in.]
with Panel Cutout Adapter (PFXZCFAD31, sold separately): W105 x H66 mm [W4.13 x H2.6 in.]

Weight

0.22 kg [0.49 lb] or less

*2The front face of the unit, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification. Even though the unit's level of resistance is equivalent to these standards, oils that should have no effect on the unit can possibly harm the unit. This can occur in areas where either vaporized oils are present, or where low viscosity cutting oils are allowed to adhere to the unit for long periods of time. If the unit's front face protection sheet becomes peeled off, these conditions can lead to the ingress of oil into the unit and separate protection measures are suggested. Also, if non-approved oils are present, it may cause deformation or corrosion of the front panel's plastic cover. Therefore, prior to installing the unit, be sure to confirm the type of conditions that will be present in the unit's operating environment. If the installation gasket is used for a long period of time, or if the unit and its gasket are removed from the panel, the original level of the protection cannot be guaranteed. To maintain the original protection level, be sure to replace the installation gasket regularly.