PFXET6600WAD

Standard product information

Family

HMI

Series

ET6000 Series

Size

12.1" Wide

Model

PFXET6600WAD

Global Code

PFXET6600WAD

Product Features

12" DC Analog

Repair Status

✔ (Maintenance service is available, able to be maintained.)

Display specifications

Display type

TFT Color LCD

Display size

12.1" Wide

Resolution

1,280 x 800 pixels (WXGA)

Effective display area

W261.12 x H163.2 mm [W10.28 x H6.43 in.]

Display colors

16 million colors*1

Backlight

White LED (Not user replaceable. When replacement is required, contact customer support.)

Backlight service life

50,000 hrs. or more (each in continuous operation at 25 °C [77 °F] before backlight brightness decreases to 25%)

Brightness control

16 Levels (Adjusted with touch panel or software)

Touch panel type

Resistive Film (analog, single-touch)

Touch panel resolution

1,024 x 1,024

Touch panel lifetime

1,000,000 times or more

*1For details about Display colors, refer to the manual for your screen editing software.

Electrical specifications

Rated input voltage

24 Vdc

Input voltage limits

19.2 to 28.8 Vdc

Allowable voltage drop

5 ms or less

Power consumption

14 W

In-rush current

30 A or less

Noise immunity

Noise Voltage : 1,000 Vp-p
Pulse Duration : 1 µs
Rise Time : 1 ns
(via noise simulator)

Voltage endurance

1,000 Vac, 20 mA for 1 minute (between charging and FG terminals)

Insulation resistance

500 Vdc, 10 MΩ or more

Environmental specifications

International safety standards

Surrounding air temperature

0 to 50 °C [32 to 122 °F]

Storage temperature

-20 to +60 °C [-4 to 140 °F]

Ambient humidity

10% to 90% RH (Non condensing, wet bulb temperature 39 °C [102.2 °F] or less)

Storage humidity

10% to 90% RH (Non condensing, wet bulb temperature 39 °C [102.2 °F] or less)

Dust

0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)

Pollution degree

For use in Pollution Degree 2 environment

Corrosive gases

Free of corrosive gases

Air pressure (altitude range)

800 to 1,114 hPa (2,000 m [6,561 ft.] above sea level or less)

Vibration resistance

IEC/EN 61131-2 compliant
5 to 9 Hz single amplitude 3.5 mm [0.14 in.]
9 to 150 Hz fixed acceleration: 9.8 m/s2
X, Y, Z directions for 10 cycles (approx. 100 min.)

Concussion resistance

IEC/EN 61131-2 compliant 147 m/s2, X, Y, Z directions for 3 times

Electrical fast transient/burst

IEC 61000-4-4
2 kV: Power port (display unit)
1 kV: Signal ports

Electrostatic discharge immunity

Contact Discharge Method: 6 kV
Air Discharge Method: 8 kV
(IEC/EN61000-4-2 Level 3)

Memory

Application memory

When using GP-Pro EX:
- Media: FLASH EPROM
- Screen Area: 64MB
- User Font Area: 8MB
- Logic Program Area: 132KB (Equivalent to 15,000 steps)
- Free Space: None

Removable System: No

Backup memory

When using GP-Pro EX:
- Screen Area: SRAM 128KB
- Variable Area: None

Battery: Replaceable battery / Primary battery for clock data backup

Interface specifications

Serial (COM1)

Asynchronous Transmission: RS-232C, Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits, Parity: None, Even or Odd, Data Transmission Speed: 2,400 to 115,200 bps, Connector: D-Sub 9 (plug)

Serial (COM2)

Asynchronous Transmission: RS-422 / 485, Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits, Parity: None, Even or Odd, Data Transmission Speed: 2,400 to 115,200 bps, Connector: D-Sub 9 pin (plug)

USB (Type A)

Conforms to USB 2.0 (Type A) x 1

USB (micro-B)

Conforms to USB 2.0 (micro-B) x 1, Maximum transmission distance : 5 m [16.4 ft]

Ethernet

IEEE802.3i / IEEE802.3u, 10BASE-T / 100BASE-TX, Connector: Modular jack (RJ-45) x 1

Structural specifications

Grounding

Functional grounding: Grounding resistance of 100 Ω, 2 mm2 (AWG 14) or thicker wire, or your country’s applicable standard.

Cooling method

Natural air circulation

Structure

IP65

External dimensions

W310.5 x H232.5 x D50 mm

Panel cut-out dimensions

W295 x H217 mm [W11.61 x H8.54 in.]
Panel thickness area: 1.6 to 5 mm [0.06 to 0.2 in.]*2

Weight

1.8 kg [3.97 lb] or less

*2For dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.]. Even if the installation wall thickness is within the recommended range for the "Panel Cut Dimensions", depending on wall's material, size, and installation location of GP unit and other devices, the installation wall could warp. To prevent warping, the installation surface may need to be strengthened.