|
Expert Vibro |
Analog inputs |
8 or 16 |
Sampling rate, set per channel |
20 Hz .. 50.000 Hz |
Usable signal range |
DC .. 20 kHz |
Voltage / current range |
± 25 V / 0 .. 20 mA, 4 .. 20 mA, free |
Signal conditioning, software switchable |
None, AC coupling, IEPE |
Resolution / input impedance |
24 Bit / 4 MΩ |
Dielectric withstand voltage |
± 100 VDC |
Galvanic isolation / channel to channel / channel to system |
± 400 VDC |
Digital frequency inputs |
4 |
Input signal |
low: 0 .. 2 V / high: 5 .. 50 VDC@3,5 mA |
Galvanic isolation |
yes, 2.5 kVDC |
Max. input frequency / min. pulse width |
1 MHz / 500 ns |
Analog outputs |
4 |
Resolution |
16 Bit |
Output range |
0 .. 10 V / ± 10 V / 0 .. 20 mA / 4 .. 20 mA |
Galvanic isolation |
400 V |
Minimum/Maximum load resistance |
650 Ω |
Digital outputs |
8 |
Switching voltage / current / PWM |
50 V / 0,6 A / galvanically isolated / 5 Hz .. 10 kHz, to 1:500 |
Maximum size / measurement values |
15 GB / .. 4 billion measurement values |
High-pass / Low-pass/ Band-pass filter |
Cutoff frequency / filter ordering / filter characteristic |
5 .. 20.000 Hz / 4, 6, 8, 10 / incl. Butterworth |
Integrator / Differentiation |
|
Single or double-integrator / differentiation |
|
FFT |
Line number / window function / averaging |
max. 12.800 lines / from Hann, Hanning, Flat-Top / 2 .. 32 times |
Types of FFT |
Narrow band / wide band, envelope / demodulation, amplitude / phase spectra |
Characteristic values from time signal |
Maximum / minimum value, peak-to-peak value, arithm. average, TRMS, max vect. sum, local min. / max values |
Characteristic values from frequency spectrum |
Amplitude, frequency, main oscillation phase, any harmonic amplitude, frequency, sum value, square root means (in any frequency bands), sum or remainder value |
Characteristic values on digital input |
Frequency |
1 Hz .. 1 MHz |
Counter |
32 Bit, UP-Down counter, quadrant decoder |
Physical equipment COM 1 / COM 2 |
RS485, 9-pole sub-D connector, DIN EN ISO 19245-1 |
Physical equipment COM 3 |
RS232, 9-pole sub-D connector |
LAN |
1 x 1000Base-TX, 1 x 100 Base-TX |
WLAN / WWAN |
802.11b/g/n / GPRS, UMTS, LTE |
USB |
Device 2.0 / host 2.0 / low / high / full |
PROFIBUS |
2 x PROFIBUS DPV1 / Slave max. 12 Mbit, incl. redundancy |
CAN / RS 232/485 |
2 x CAN 2.0 / Modbus RTU, SCPI, ASCII |
TCP/IP |
Modbus TCP |
Dimensions / weight |
210 mm x 80 mm x 125 mm / 750 g |
Fixing |
Rail mounting DIN EN 60715 or screw fixing |
Signal connections |
Plug-in screw terminals, 96 terminals in 2 rows, max. 1,5 mm² |
Temperature range |
-20 .. 60° C |
Supply voltage |
12 … 24 VDC / ± 10% |
Power input |
ca. 20 Watt
|
|
|
|
|
Product & Technology News
Pressure and Temperature Transmitter
Download Catalogue
|