|
|
|
Maintenance
Equipped with a user-replaceable battery
- Makes maintenance simple, even for equipment that is used for extended periods of time.
- Lets you save data even when using equipment that is left unpowered for long periods of time, giving peace of mind.
- It is recommended that batteries are replaced every 5 years. Batteries can be purchased as maintenance items.
No more accidental dropping
Special projections prevent the GP4000 series from being accidentally dropped through the hole when it is being installed in a panel.
Consistent direction of cabling
Thanks to a consistent connection direction for cables and other interfaces, routing of wiring is now simpler than ever.
Compatibility for easy replacement
Since the panel cutting dimensions are the same as conventional models, it is easy to replace only the display unit in an existing facility.
Easy to change the display screen
- The display screen can be changed by using a USB flash memory or SD card, without the need for a software license.
- The screen maintenance can be done without bringing a PC to a production site.
- A person in charge does not have to operate a PC, such as when manufacturing the multiple units of the same equipment.
Commercially available Type A to Mini-B USB cables can be used to transfer screen data.
Conforms to overseas standards for hassle-free export and use with overseas equipment
-
IP65f Front Enclosure
-
NEMA#250 TYPE 4X/13
-
Marine certifications, DNV, GL, ABS, BV, LR, RINA and NK, CCS.
-
UL/cUL Hazardous Locations Class I, Division 2 Group A, B, C and D.
-
Acquired ATEX Zone 2/22 (Gas/Dust)
-
Acquired KCs (Korean Simple Explosion-proof)
-
Acquired NEPSI (Chinese Simple Explosion-proof)
Environment-Friendly
Energy Saving - Standard equipped with LED backlight LCD + Lighting adjustment
Energy-saving capabilities have been greatly improved. The GP4000 Series contributes to reducing on-site power consumption in a variety of ways including an on-board LED backlight in all models, and a lighting adjustment function used to decrease and eventually stand-by the display after being idle for a set period of time.
Easily connect multiple USB devices
A controller with serial interface, EZ Series accessory unit, bar code reader, and USB flash drive can be easily connected to the HMI unit.
|
|
|
|
|