|
|
|
Specification of PS-4600 (0 Slot) - Rear Mount Model
PS-4600 0 Slot Rear Mount model
Model: PFXPF160xxxxxxxx00
XGA / Memory: Core i3 3217UE: 1GB-16GB, Celeron M 827E: 1GB-16GB
OS:Windows XP, 7, 7 Embedded, 2009 Embedded
CPU: Core i3-3217UE 1.60 GHz/Celeron M 827E 1.40 GHz
Functional Specification
Display Size |
12.1" |
Display Colors |
16 million |
Backlight |
LED
Life span > 50,000 h @ 25 °C [77 °F] |
Brightness Control |
Step less adjustment |
Supported OS |
HDD or SSD: Windows® XP Professional SP3 (32bit) or Windows® 7 Ultimate (32 or 64bit)
CFast: Windows® Embedded Standard 2009 (32bit) or Windows® Embedded Standard 7 Premium (32bit)*1 |
CPU |
CoreTM i3-3217UE 1.60 GHz / Celeron® M 827E 1.40 GHz |
L2 Cache Memory |
CoreTM i3: 3MB
Celeron®: 1.5MB |
Main Memory |
DDR3: 1 GB to 16 GB max. |
Chipset |
CoreTM i3: 3217UE
Celeron® M: 827E |
Graphics Accelerator |
CoreTM i3: Intel® HD Graphics 4000
Celeron® M: Intel® HD Graphics 3000 |
Video Memory |
Up to 1 GB*2 |
Graphics |
XGA TFT active matrix (1,024 x 768 pixels) |
Touch Panel Type |
Analog resistive film |
Touch Panel Resolution |
4,096 x 4,096 |
Interface |
Serial ATA |
Slide-in Disk: (HDD, SSD or CFast with Slide-in Disk Adapter unit) x1
CFast: x1*3 |
Serial (COM1) |
RS-232C (D-Sub 9-pin, plug) |
Serial (COM2) |
RS-232C (D-Sub 9-pin, plug) |
Ethernet (LAN1) |
10/100/1000 Mbit/s (RJ-45 Modular jack) |
Ethernet (LAN2) |
10/100/1000 Mbit/s (RJ-45 Modular jack) |
USB (TYPE-A) |
USB 2.0 x4 (bottom side)*4 |
Video |
DVI-I x1 |
-
*1 For Windows® Embedded Standard 2009, 4 GB CFast or more is required. For Windows® Embedded Standard 7 Premium, 8 GB CFast or more is required.
-
*2 Reserved from main memory
-
*3 Modifying products to install an HDD into a Slide-in Disk when it was not installed from factory, requires to change the unit firmware settings for proper behavior of the fan (that are required when running with HDD into a Slide-in Disk) - Please contact Pro-face support if you want to proceed such modification.
-
*4 USB 3.0 is equipped with CoreTM i3 models of Windows® 7 or Windows® Embedded Standard 7
Maximum 500 mA per connection for USB5
Maximum 1 A per connection for USB1, USB2, USB3 and USB4
USB5 is not equipped with Rear Mount Model
General Specification
International Safety Standards |
|
Rated Input Voltage |
AC Power Model: 100 to 240 Vac
DC Power Model: 24 Vdc ±25 % |
Rated frequency |
AC Power Model: 50/60 Hz |
Power Consumption |
AC Power Model: 130 W
DC Power Model: 130 W*5 |
In-Rush Current |
AC Power Model: < 20 A (Cold restart, 100 % load, 100 Vac)
DC Power Model: Typical 7 A, max. 60 A < 300 μs |
Surrounding Air Temperature |
When using HDD running with a fan kit, SSD or CFast: 0 to 50 °C [32 to 122 °F]
When using Gigabit Ethernet: 0 to 45 °C [32 to 113 °F]
When using DVD multi drive: 5 to 45 °C [41 to 113 °F] |
Storage Temperature |
– 20 to +60 °C [– 4 to +140 °F] |
Ambient Humidity |
10 to 85 % RH (Wet bulb temperature: 29 °C [84.2 °F] max. - no condensation) |
Storage Humidity |
10 to 85 % RH (Wet bulb temperature: 29 °C [84.2 °F] max. - no condensation) |
Pollution Degree |
For use in Pollution Degree 2 environment |
Air Pressure (altitude range) |
2,000 m [6,560 ft] max. |
Vibration Resistance |
EN/IEC 60068-2-6 Fc
-
Operation (continuous) for 6 Fc products with SSD or CFast card storage device: 2 to 9 Hz: 1.5 mm [0.06 in.], 9 to 200Hz: 4.9 m/s2, 5 to 8.4 Hz: 1.75 mm [0.07], 8.4 to 150 Hz: 4.9 m/s2
-
Operation (continuous) for products with HDD storage device: 5 to 100 Hz: 1.225 m/s2
-
Operation (occasional) for products with SSD or CFast card storage device: 2 to 9 Hz: 3 mm [0.12 in.], 9 to 200 Hz: 9.8 m/s2, 5 to 8.4 Hz: 3 mm [0.12], 8.4 to 150 Hz: 9.8 m/s2
-
Operation (occasional) for products with HDD storage device: 5 to 100 Hz: 2.450 m/s2
|
Concussion Resistance |
147 m/s2 for a duration of 11 ms (IEC 60068-2-27 Ea test) |
Electromagnetic Compatibility (EMC) |
Immunity to High Frequency Interference
Electromagnetic Emissions Class A |
Structure |
- |
Cooling Method |
Passive heat sink for the operation without HDD storage device into Slide-in Disk. Optional fan kit necessary for the operation with HDD storage device into Slide-in Disk. |
Weight Approx. |
3.9 kg (8.59 lb) |
External Dimensions |
W292 x H246 x D69 mm [W11.50 x H9.69 x D2.71 in.]*6 |
Panel Cut Dimensions |
W270 +1.0/0 mm x H206 +1.0/0 mm [10.63 +0.04/0 in. x 8.11 +0.04/0 in.] |
-
*5 The value does not include the power supplied to USB devices, which you attach.
The product's maximum power consumption including the power supplied to them is 130W.
-
*6 The length between two mounting holes
External Dimensions
Panel Cut-out
The thickness of the installation panel must be exactly 2.3 mm [0.09 in.]
|
|
|
|
|