|
|
|
Specification of PS3650A-T42
PS-3650A
Model: PS3650A-T42
XGA / DDR2 256MB-1GB
Celeron(R) M 1.5GHz
Functional Specification
Display Type |
TFT Color LCD |
Display Size |
12.1" |
Resolution |
1,024 x 768 pixels (XGA) |
Dot pitch |
W0.24 x H0.24 mm [W0.01 x H0.01 in.] |
Effective Display Area |
W245.76 x H184.32 mm [W9.68 x H7.26 in.] |
Display Colors |
262,144 Colors |
Backlight |
CCFL (Replaceable) |
Brightness Control |
4 Levels (Adjusted with the software) |
Contrast Control |
Not applicable |
Backlight Service Life |
60,000 hrs. or more (continuous operation at 25℃ before backlight brightness decreases to 50% or backlight starts to blink) |
Supported OS |
Windows® XP/Windows® XP Embedded |
CPU |
Intel® Celeron® M 1.5 GHz |
L2 Cache Memory |
1 MB (Built in the CPU) |
Main Memory |
DDR SDRAM (PC2700), 256 MB/512 MB/1 GB (SO-DIMM socket x 1 slot) |
Chipset |
Intel® 855GME + ICH4 |
Graphics Accelerator |
Built in Intel® 855GME |
Video Memory |
64 MB or less (When using Windows®) UMA Type |
Graphics |
XGA (1,024 x 768 pixels) |
BIOS |
Phoenix® First BIOS Embedded Pro |
Clock Accuracy |
±180 sec. /month (deviation at room temperature and power is OFF)*1 |
Touch Panel Type |
Resistive Film (analog) |
Touch Panel Resolution |
1,024 X 1,024 |
Touch Panel Service Life |
1,000,000 times or more |
Interface |
Serial ATA |
Serial ATA Rev. 1.0a x 1, 2.5" HDD Unit |
IDE |
CF Card Slot (Type I/II) x 1 (Master or Slave)*2 |
Serial (COM1) |
RS-232C (RS-232C/422/485 switch possible, RI/+5 V switch possible), Connector: D-Sub9 (plug) |
Ethernet (LAN1) |
IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX, Connector: Modular jack (RJ-45) x 1 |
Ethernet (LAN2) |
IEEE802.3i/IEEE802.3u/IEEE802.3ab, 10BASE-T/100BASE-TX/1000BASE-T, Connector: Modular jack (RJ-45) x 1*3 |
USB (TYPE-A) |
Conforms to USB1.1 (TYPE-A) x 1, Conforms to USB2.0 (TYPE-A) x 4, Power Supply Voltage: DC5 V ±5 %, Output Current: 500 mA or less, Communication Distance: 5 m or less |
RAS |
Input (external reset input possible): 2 points, Output 2 points, Rated Voltage: DC 12 V, Maximum Rated Current: 100 mA, Connector: D-Sub9 (socket) x 1 |
Sound |
Speaker output, connector: mini-pin jack |
PCMCIA |
PC Card Slot, Card Bus supported connector (except for Zoomed Video, Sound features): Type II x 1 |
-
*1 Depending on the operating temperature and age of unit, the clock can deviate ±300 sec./month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.
-
*2 Can be switched between Master and Slave via the settings.
-
*3 Wake On LAN supported.
General Specification
International Safety Standards |
|
Rated Input Voltage |
AC 100 to 240 V |
Input Voltage Limits |
AC 85 to 264 V |
Rated frequency |
50/60 Hz |
Allowable Voltage Drop |
1 cycle or less(Voltage drop interval must be 1 second or more.) |
Power Consumption |
110 VA or less |
In-Rush Current |
AC 100 V, 30 A or less, AC 240 V, 50 A or less |
Voltage Endurance |
AC 1,500 V 20 mA for 1 min (between charging and FG terminals) |
Insulation Resistance |
DC 500 V, 10 MΩ or more (between charging and FG terminals) |
Surrounding Air Temperature |
5 to 50 ℃: with HDD, 0 to 50 ℃: without HDD |
Storage Temperature |
-20 to +60 ℃ |
Ambient Humidity |
10 to 90 % RH (Not condensing, wet bulb temperature: 39 ℃ or less. Wet bulb temperature with HDD: 29 ℃ or less) |
Storage Humidity |
10 to 90 % RH (Wet bulb temperature: 39 ℃ or less - no condensation.) |
Dust |
0.1 mg/m3 or less (non-conductive levels) |
Pollution Degree |
For use in Pollution Degree 2 environment |
Atmosphere |
Free of corrosive gases |
Air Pressure (altitude range) |
800 to 1,114 hPa (2,000 m above sea level or less) |
Vibration Resistance |
With HDD: 10 to 57 Hz Single amplitude 0.075 mm [0.003 in.], 57 to 150 Hz Fixed acceleration 9.8 m/s², X, Y, Z directions for 10 cycles (80 min), Without HDD: IEC/EN61131-2 compliant, 5 to 9 Hz Single amplitude 3.5 mm [0.14 in.], 9 to 150 Hz Fixed acceleration 9.8 m/s², X, Y, Z directions for 10 cycles (100 min) |
Noise Immunity |
Noise Voltage: 1,500 Vp-p, Pulse Duration: 50 ns, 500 ns, 1 μs, Rise Time: 1 ns, (via noise simulator) |
Noise Immunity (Fast Transient Burst Noise) |
Power Line: 2 kV (IEC/EN61000-4-4), COM Port: 1 kV (IEC/EN61000-4-4) |
Electrostatic Discharge Immunity |
Contact Discarge Method: 6kV (IEC/EN61000-4-2 Level 3) |
Grounding |
Functional grounding: Grounding resistance of 100Ω, 2mm² or thicker wire, or your country's applicable standard. (Same for FG and SG terminals) |
Structure |
Equivalent to IP65f (When embedding the panel and not using the front panel USB port.)*4 |
Installation Configuration |
Embedded panel |
Cooling Method |
Forced air cooling by the CPU fan |
Weight Approx. |
4.5 kg [9.9 lb] or less (display unit only) |
External Dimensions |
W313 x H239 x D103 mm [W12.32 x H9.41 x D4.06 in.] |
Panel Cut Dimensions |
W301.5 x H227.5 mm [W11.87 x H8.96 in.], Panel thickness area: 1.6 to 10 mm [0.06 to 0.39 in.]*5 |
-
*4 The front face of the GP unit, installed in a solid panel, has been tested using, conditions equivalent to the standards shown in the specification. Even though the, GP unit's level of resistance is equivalent to these standards, oils that should have, no effect on the GP can possibly harm the unit. This can occur in areas where either, vaporized oils are present, or where low viscosity cutting oils are allowed to adhere, to the unit for long periods of time. If the GP's front face protection sheet becomes, peeled off, these conditions can lead to the ingress of oil into the GP and separate, protection measures are suggested., Also, if non-approved oils are present, it may cause deformation or corrosion of the, front panel’s plastic cover. Therefore, prior to installing the GP be sure to confirm the, type of conditions that will be present in the GP's operating environment., If the installation gasket is used for a long period of time, or if the unit and its gasket, are removed from the panel, the original level of the protection cannot be guaranteed., To maintain the original protection level, be sure to replace the installation gasket, regularly.
-
*5 Regarding dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.].
External Dimensions / Interfaces / Panel Cut-out
|
|
|
|
|