Specification of APL3000-BA

PL-3000B
Model: APL3000-BA

/ DDR2 512MB-4GB

Core TM Duo 2.0GHz/Celeron(R)M440 1.86GHz

Functional Specification

Supported OS		Windows® 2000/Windows® XP/Windows® XP Embedded
CPU		Intel® Core™ Duo 2.0 GHz/Celeron® M 440 1.86 GHz
L2 Cache Memory		Intel® Core™ Duo 2.0 GHz 2 MB/Celeron® M 440 1.86 GHz 1 MB (Built in the CPU)
Main Memory		DDR2 SDRAM (PC4200), 512 MB/1 GB/2 GB (SO-DIMM socket x 2 slots)*1
Chipset		Intel® 945GME + ICH7M
Graphics Accelerator		Built in Intel® 945GME
Video Memory		64 MB or less (When using Windows®) UMA Type
Graphics		VGA (640 x 480 pixels) to UXGA (1,600 x 1,200 pixels)
BIOS		Phoenix® TrustedCore™ BIOS
Clock Accuracy		±180 sec/month (deviation at room temperature and power is OFF)*2
Interface	Serial ATA	Serial ATA Rev. 1.0a x 2, 2.5" HDD Unit or SSD Unit
	IDE	Master: CF Card Slot (Type I/II compatible) x 1, Slave: DVD Drive x 1
	Serial (COM1)	RS-232C (RS-232C/422/485 switch possible, RI/+5 V switch possible), Connector: D-Sub9 (plug)
	Serial (COM2)	RS-232C (RI/+5 V switch possible), Connector: D-Sub9 (plug)
	Serial (COM3)	RS-232C, Connector: D-Sub9 (plug)
	Serial (COM4)	RS-232C, Connector: D-Sub9 (plug)
	Ethernet (LAN1)	IEEE802.3i/IEEE802.3u/IEEE802.3ab, 10BASE-T/100BASE-TX/1000BASE-T, Connector: Modular jack (RJ-45) x 1
	Ethernet (LAN2)	IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX, Connector: Modular jack (RJ-45) x 1
	USB (TYPE-A)	Conforms to USB2.0 (TYPE-A) x 4, Power Supply Voltage: DC 5 V ±5 %, Output Current: 500 mA or less, Communication Distance: 5 m or less
	Video	DVI-I OUT, Connector: DVI-I 29 pin (socket) X 1*3
	RAS	Input (external reset input possible): 2 points, Output 2 points, Rated Voltage: DC 12 V, Maximum Rated Current: 100 mA, Connector: D-Sub9 (socket) x 1
	Sound	Speaker output, connector: mini-pin jack
	CD/DVD-ROM Drive	DVD-ROM Drive/DVD Multi Drive (option)

*1 Available memory region is around 3.5GB.
*2 Depending on the operating temperature and age of unit, the clock can deviate ±300 sec/month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.
*3 When the dual output with the front module is selected, the DVI-I can be connected to an analog RGB monitor only., ･ When connecting the Pro-face FP3000 Series to the PL-3000B Series, use the Pro-face DVI-D cable (10m) FP-DV01-100.

Page Top

General Specification

International Safety Standards
Rated Input Voltage			AC 100 to 240 V
Input Voltage Limits			AC 85 to 264 V
Rated frequency			50/60 Hz
Rated frequency range			47 to 63 Hz
Allowable Voltage Drop			1 cycle or less(Voltage drop interval must be 1 second or more.)
Power Consumption			2-slot type: 120 VA or less, 4-slot type: 145 VA or less
In-Rush Current			40 A or less
Voltage Endurance			AC 1,500 V 20 mA for 1 min (between charging and FG terminals)
Insulation Resistance			DC 500 V, 10 MΩ or more (between charging and FG terminals)
Surrounding Air Temperature			5 to 50 ℃: with HDD, 0 to 50 ℃: without HDD*4
Storage Temperature			-20 to +60 ℃
Ambient Humidity			10 to 90 % RH (Not condensing, wet bulb temperature: 39 ℃ or less. Wet bulb temperature with HDD/DVD drive: 29 ℃ or less)
Storage Humidity			10 to 90 % RH (Wet bulb temperature: 39 ℃ or less - no condensation.)
Dust			0.1 mg/m3 or less (non-conductive levels)
Pollution Degree			For use in Pollution Degree 2 environment
Atmosphere			Free of corrosive gases
Air Pressure (altitude range)			800 to 1,114 hPa (2,000 m above sea level or less)
Vibration Resistance			With HDD: 10 to 57 Hz Single amplitude 0.075 mm [0.003 in.], 57 to 150 Hz Fixed acceleration 9.8 m/s², X, Y, Z directions for 10 cycles (80 min), Without HDD: IEC/EN61131-2 compliant, 5 to 9 Hz Single amplitude 3.5 mm [0.14 in.], 9 to 150 Hz Fixed acceleration 9.8 m/s², X, Y, Z directions for 10 cycles (100 min)*5
Noise Immunity			Noise Voltage: 1,500 Vp-p, Pulse Duration: 50 ns, 500 ns, 1 μs, Rise Time: 1 ns, (via noise simulator)
Electrostatic Discharge Immunity			Contact Discharge Method: 6 kV (IEC/EN61000-4-2 Level 3)
Grounding			Protective grounding: Grounding resistance of 100 Ω, 2 mm² or thicker wire, or your country's applicable standard. (Same for FG and SG terminals)
Installation Configuration			Stand-alone
Cooling Method			Forced air cooling by the CPU fan
Weight Approx.			2 slot type: 6 kg [13.2 lb] or less (display unit only), 4 slot type: 7.5 kg [16.5 lb] or less (display unit only)
External Dimensions			2 slot type: W243 x H125.5 x D277 mm [W9.57 x H4.94 x D10.91 in.](Horizontal mounting), 4 slot type: W243 x H176.5 x D277 mm [W9.57 x H4.94 x D10.91 in.](Horizontal mounting)