Specification of PS3000-BA

PS-3000B
Model: PS3000-BA

/ DDR2 256MB-1GB

ULV Celeron(R)M 600MHz

ManualProgram Download

Functional Specification

Supported OS		Windows® 2000/Windows® XP/Windows® XP Embedded
CPU		ULV Intel® Celeron® M 1.0 GHz
Main Memory		DDR SDRAM (PC2700), 256 MB/512 MB/1 GB (SO-DIMM socket x 1 slot)
Chipset		Intel® 855GME + ICH4
Graphics Accelerator		Built in Intel® 855GME
Video Memory		64 MB or less (When using Windows®) UMA Type
Graphics		VGA (640 x 480 pixels) to FHD (1,920 x 1,080 pixels)
BIOS		Phoenix® First BIOS Embedded Pro
Clock Accuracy		±180 sec. /month (deviation at room temperature and power is OFF)*1
Interface	IDE	2.5" HDD X 1 (Primary Master), CF Card Slot (Type I/II) X 2 (Primary Slave and Secondary Master)
	Serial (COM1)	RS-232C, Connector: D-Sub9 (plug)
	Serial (COM2)	RS-232C (RS-232C/422/485 switch possible, RI/+5 V switch possible), Connector: D-Sub9 (plug)
	Ethernet (LAN1)	IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX, Connector: Modular jack (RJ-45) x 1
	Ethernet (LAN2)	IEEE802.3i/IEEE802.3u/IEEE802.3ab, 10BASE-T/100BASE-TX/1000BASE-T, Connector: Modular jack (RJ-45) x 1*2
	USB (TYPE-A)	Conforms to USB2.0 (TYPE-A) x 4, Power Supply Voltage: DC 5 V ±5 %, Output Current: 500 mA or less, Communication Distance: 5 m or less
	Video	Analog RGB output connector: mini D-Sub9 (socket) x 1
	Sound	Speaker output, connector: mini-pin jack

*1 Depending on the operating temperature and age of unit, the clock can deviate ±300 sec./month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.
*2 Wake On LAN supported.

Page Top

General Specification

International Safety Standards
Rated Input Voltage			AC 100 to 240 V
Input Voltage Limits			AC 85 to 264 V
Rated frequency			50/60 Hz
Allowable Voltage Drop			1 cycle or less(Voltage drop interval must be 1 second or more.)
Power Consumption			120 VA or less
In-Rush Current			AC 100 V, 30 A or less, AC 240 V, 50 A or less
Voltage Endurance			AC 1,500 V 20 mA for 1 min (between charging and FG terminals)
Insulation Resistance			DC 500 V, 10 MΩ or more (between charging and FG terminals)
Surrounding Air Temperature			5 to 50 ℃: with HDD, 0 to 50 ℃: without HDD
Storage Temperature			-20 to +60 ℃
Ambient Humidity			10 to 90 % RH (Not condensing, wet bulb temperature: 39 ℃ or less. Wet bulb temperature with HDD: 29 ℃ or less)
Storage Humidity			10 to 90 % RH (Wet bulb temperature: 39 ℃ or less - no condensation.)
Dust			0.1 mg/m3 or less (non-conductive levels)
Pollution Degree			For use in Pollution Degree 2 environment
Atmosphere			Free of corrosive gases
Air Pressure (altitude range)			800 to 1,114 hPa (2,000 m above sea level or less)
Vibration Resistance			With HDD: 10 to 25 Hz 4.9 m/s², X,Y,Z directions (30 min), Without HDD: IEC/EN61131-2 compliant, 5 to 9 Hz Single amplitude 3.5 mm [0.14 in.], 9 to 150 Hz Fixed acceleration 9.8 m/s², X, Y, Z directions for 10 cycles (100 min)
Noise Immunity			Noise Voltage: 1,500 Vp-p, Pulse Duration: 50 ns, 500 ns, 1 μs, Rise Time: 1 ns, (via noise simulator)
Noise Immunity (Fast Transient Burst Noise)			Power Line: 2 kV (IEC/EN61000-4-4), COM Port: 1 kV (IEC/EN61000-4-4)
Electrostatic Discharge Immunity			Contact Discarge Method: 6kV (IEC/EN61000-4-2 Level 3)
Grounding			Functional grounding: Grounding resistance of 100Ω, 2mm² or thicker wire, or your country's applicable standard. (Same for FG and SG terminals)
Structure			IP20
Installation Configuration			Stand-alone
Cooling Method			Forced air cooling by the CPU fan
Weight Approx.			3 kg [6.6 lb] or less (display unit only)
External Dimensions			W255 x H164 x D124 mm [W10.04 x H6.46 x D4.88 in.]