|
|
|
Specification of PS3001-BD
PS-3001B
Model: PS3001-BD
/ DDR2 256MB-1GB
ULV Celeron(R)M 600MHz
Functional Specification
Supported OS |
Windows® 2000/Windows® XP/Windows® XP Embedded |
CPU |
ULV Intel® Celeron® M 600 MHz |
L2 Cache Memory |
512 KB (Built in the CPU) |
Main Memory |
DDR SDRAM (PC2700), 256 MB/512 MB/1 GB (SO-DIMM socket x 1 slot) |
Chipset |
Intel® 855GME + ICH4 |
Graphics Accelerator |
Built in Intel® 855GME |
Video Memory |
64 MB or less (When using Windows®) UMA Type |
Graphics |
SVGA (800 x 600 pixels) to FHD (1,920 x 1,080 pixels) |
BIOS |
Phoenix® First BIOS Embedded Pro |
Clock Accuracy |
±180 sec. /month (deviation at room temperature and power is OFF)*1 |
Interface |
IDE |
CF Card Slot (Type I/II) x 2 (Primary Slave and Secondary Master) |
Serial (COM1) |
RS-232C, Connector: D-Sub9 (plug) |
Serial (COM2) |
RS-232C (RS-232C/422/485 switch possible, RI/+5 V switch possible), Connector: D-Sub9 (plug) |
Ethernet (LAN1) |
IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX, Connector: Modular jack (RJ-45) x 1 |
Ethernet (LAN2) |
IEEE802.3i/IEEE802.3u/IEEE802.3ab, 10BASE-T/100BASE-TX/1000BASE-T, Connector: Modular jack (RJ-45) x 1*2 |
USB (TYPE-A) |
Conforms to USB2.0 (TYPE-A) x 4, Power Supply Voltage: DC 5 V ±5 %, Output Current: 500 mA or less, Communication Distance: 5 m or less |
Video |
Analog RGB output connector: mini D-Sub9 (socket) x 1 |
Sound |
Speaker output, connector: mini-pin jack |
-
*1 Depending on the operating temperature and age of unit, the clock can deviate ±300 sec./month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.
-
*2 Wake On LAN supported.
General Specification
International Safety Standards |
|
Rated Input Voltage |
DC 24 V |
Input Voltage Limits |
DC 19.2 to 28.8 V |
Rated frequency |
50/60 Hz |
Allowable Voltage Drop |
5 ms or less |
Power Consumption |
40 W or less |
In-Rush Current |
30 A or less |
Voltage Endurance |
AC 500 V, 20 mA for 1 min (between charging and FG terminals) |
Insulation Resistance |
DC 500 V, 10 MΩ or more (between charging and FG terminals) |
Surrounding Air Temperature |
0 to 50 ℃ |
Storage Temperature |
-20 to +60 ℃ |
Ambient Humidity |
10 to 90 % RH (Wet bulb temperature: 39 ℃ or less - no condensation.) |
Storage Humidity |
10 to 90 % RH (Wet bulb temperature: 39 ℃ or less - no condensation.) |
Dust |
0.1 mg/m3 or less (non-conductive levels) |
Pollution Degree |
For use in Pollution Degree 2 environment |
Atmosphere |
Free of corrosive gases |
Air Pressure (altitude range) |
800 to 1,114 hPa (2,000 m above sea level or less) |
Vibration Resistance |
IEC/EN61131-2 compliant, 5 to 9 Hz Single amplitude 3.5 mm [0.14 in.], 9 to 150 Hz Fixed acceleration: 9.8 m/s², X, Y, Z directions for 10 cycles (100 min) |
Noise Immunity |
Noise Voltage: 1,500 Vp-p, Pulse Duration: 50 ns, 500 ns, 1 μs, Rise Time: 1 ns, (via noise simulator) |
Noise Immunity (Fast Transient Burst Noise) |
Power Line: 2 kV (IEC/EN61000-4-4), COM Port: 1 kV (IEC/EN61000-4-4) |
Electrostatic Discharge Immunity |
Contact Discarge Method: 6kV (IEC/EN61000-4-2 Level 3) |
Grounding |
Functional grounding: Grounding resistance of 100Ω, 2mm² or thicker wire, or your country's applicable standard. (Same for FG and SG terminals) |
Structure |
IP20 |
Installation Configuration |
Stand-alone |
Cooling Method |
Natural air circulation |
Weight Approx. |
2 kg [4.4 lb] or less (display unit only) |
External Dimensions |
W255 x H164 x D68.8 mm [W10.04 x H6.46 x D2.71 in.] |
External Dimensions / Interfaces / Panel Cut-out
Panel Cut-Out Dimensions
|
|
|
|
|