DOWNLOADS

Catalogue "Measuring and inspection systems for plastics processing industry" (PDF, 1.51 MB)

Non-contact inspection of extruder bores

Applying the IDS 8100.C the diameter of case bores of extruders can be detected precisely. The wear of the machine which has been generated due to abrasive raw material, temperature and pressure can be controlled without contact.

Advantages:

Significant reduction of the service time
Allows the exchange of defective segments
Suitable for all metals without further calibration
Local evaluation with touchscreen controller

Material parameter:

Housing diameters from 40 mm to 180 mm
Diameter variantions 8 or 16 mm
Suitable for all metals

IDS 8100.C

Data sheet "idiamCONTROL" (PDF, 258 KB)Catalog "Measuring and inspection systems for plastics processing industry" (PDF, 1.51 MB)

The IDS 8100.C works with integrated capacitive displacement sensors. The actual bore diameters are detected over the whole process part length. As the axial sensor positions are detected as well using a cable-length measurement system, local deviations in diameter can be reliably and quickly found. In doing so, each sensor position is related to a diameter in the longitudinal axis of the bore hole.

Features: