DRC Range Inline Analogue Conditioner - Specification

DRC Inline Conditioner
Power Requirements	Bipolar Supply
Voltage (VDC)	10 to 30
Current Range	160 mA @ 10 V to 70 mA @ 30 V

Sensor Excitation
Primary Voltage (Vrms)	3 nominal
Primary Frequency (kHz)	5, 10 or 13 (Link Selectable)

Signal Input
Input Range (mV)	55 to 5000 (LVDT Full Range)
Input Load Resistance (kΩ)	100, 2
Options	(See note¹)
¹No inputs are offered. As connection is by screw terminal, additional internal configuration methods are not required. By changing connections and use of external components, the user can perform: Change of Input Polarity Half Bridge Connection Grounding on one side of the input Phase Correction Quad Resistors
Signal Output
Voltage Output (VDC)	Up to ± 10
Current Output (mA)	Up to ± 20 into 150 Ω load
Output Ripple	< 1 mVrms
Output Offset	100% (Coarse and fine adjustment²)
Temperature Coefficient Gain	< 0.01% FRO/°C
Temperature Coefficient Offset	< 0.01% FRO/°C
Warm Up Time	15 Minutes (recommended)
Linearity	< 0.1% FRO
Bandwith^-3db (Hz)	500, 1 kHz Link Settable
²Fine adjustment via the front panel.
Environmental
Operating Temperature Range (°C)	0 to +60
Storage Temperature Range (°C)	-20 to +85

Mechanical and Connections
Transducer	Screw Terminals
Power Supply	Screw Terminals
Output Signal	Screw Terminals
Material	Green Polyamide
Enclosure Dimensions without Connectors (mm)	114.5 x 99 x 22.5
Weight (g)	120