BICM Inline Analogue Conditioner - Specification

BICM Inline Conditioner
	Standard BICM		IP 67 BICM
Power Requirements	Bipolar Supply	Unipolar Supply	Bipolar Supply
Voltage	± 15 VDC ± 1.5 VDC	24 VDC ± 2.4 VDC	± 15 VDC ± 1.5 VDC
Current (mA)	± 15 nominal	30 nominal	± 15 nominal

Sensor Excitation
Primary Voltage¹ (Vrms)	2 nominal
Primary Frequency² (kHz)	5 typical
Primary Current (mA)	10 nominal
¹For other input voltages, please contact Solartron.
²For other output frequencies, please contact Solartron.
Signal Input (Sensor Sensitivity Range)
Input Range	Up too 2.5 Vrms
Input Load Resistance (kΩ)	100

Signal Output
Voltage Output (VDC)	Up to ± 10
Maximum Current Output (mA)	11
Output Ripple	< 40 mVrms
Output Offset	100%
Temperature Coefficient Gain	< 0.03% FRO/°C
Temperature Coefficient Offset	< 0.025% FRO/°C
Warm Up Time	15 Minutes (recommended)
Linearity	< 0.1% FRO
Bandwidth^-3db (Hz)	250 typical

Environmental
Operating Temperature Range (°C)	0 to +70
Storage Temperature Range (°C)	-20 to +85
IP Rating	IP 40		IP 65

Mechanical and Connections
Connections	Solder Pad or Factory Fit		Factory Fit only
Enclosure Dimensions without Connectors (mm)	98.5 x 30.5 x 13.0		73.0 x 20.6
Weight (g)	30		75
Material	ABS		400 Series Stainless Steel
Cable Lengths All specification limits assume a nominal 3 m cable length between transducer and BICM. The BICM can be mounted up to 10 m from the sensor, but this may result in reduced performance. Not all transducers can cope with long cable lengths. (Cable from the BICM to the processing or display unit should be limited to 100 m).